Handheld LED Rechargeable Hunting Spotlight 3W Multifunctional
Rechargeable Spotlight Super Bright LED Flashlight Handheld Searchlight Camping Flashlight
Applications:
Outdoor sports, such as camping, hiking, running, climbing, fishing, boating, etc.
Machine, electricity, vehicle inspection, fixing in workshop, garage, factory.
Safety patrolling, police checking.
Walking the dog, and walking in the darkness.
Light source | LED power | W | 3 |
Luminous flux | LM | 180 | |
Life | h | 100,000 | |
Battery | Rated capacity | mAh | 4400 |
Rated voltage | V | 3.7 | |
Charging time | h | ≤4 | |
Life | cycle | 1000 times | |
Charger | Input voltage | V | AC100~240 |
Output voltage | V | DC4.5 | |
Output current | A | 1 | |
Lighting time | h | Strong light 15h/Working light 25h | |
Effective illumination distance | m | 100 | |
Applicable temperature | ℃ | -20℃~40℃ | |
Maximum surface temperature | ℃ | ≤50℃ | |
Dimensions | mm | 217.3×103.8×87 | |
Weight (including battery) | g | 370 | |
Enclosure protection grade | IP66 | ||
Explosion-proof mark | Exib ⅡC T4 |
Performance characteristics:
Safety: It adopts integrated isolation and explosion-proof design, compact structure, dustproof and waterproof; with battery protection function, it can effectively prevent the battery from overcharging and overdischarging.
Reliability: The entire product shell is made of high-strength bulletproof plastic, and the rear shell is made of non-breakable engineering plastic, which is resistant to strong impact, waterproof, and corrosion resistance.
Energy saving: High-efficiency semiconductor light-emitting technology, compared with traditional light sources, can save up to 70℅ at the same brightness.
Economical: Long-life LED, maintenance-free, no need to replace the bulb, no follow-up use cost.
Environmental protection: high-performance lithium battery, green, environmentally friendly, no pollution, no memory, low self-discharge rate.
Convenience: small size, light weight, convenient and comfortable to wear, reducing user load.
Uniqueness: The lamp holder can adjust the angle arbitrarily within 0-130 degrees; it has a stroboscopic function to realize long-distance signal transmission; magnetic adsorption and waterproof design, can float on the water; choose strong light and working light according to work needs.
Structure function:
①Light source: light emitting diode
②Light button: switch light
③Charging jack: 4.5V@ 1A
Charging operation:
1. The charger voltage input is 100-240V@50/60HZ, and the output is 4.5V@1A;
2. The charger has a built-in charging protection device. When the indicator light is red, it means normal charging, and when the indicator light turns to green, it means the battery is fully charged;
3. Please use the matching charger, and charge it every two months when not in use for a long time.
Precautions:
When charging or continuously discharging in a place with high ambient temperature, the surface of the torch will heat up slightly, which is a normal phenomenon.
Instructions:
Turn on and off the light: Press the light button once, the working light work mode; press the light button again, the strong light work mode; press the light button again, the main light turns off.
Strobe control: long press the light button for three seconds, working in signal mode.
Initial use: Please make sure that the battery is sufficient for more than six hours before use. Long-term storage is affected by the self-discharge of the battery, and the control circuit protects the battery so that the battery has no voltage. Therefore, it is a normal phenomenon that the lamp cannot work before charging.