Rechargeable 3.7V HD 1080P Photographic Flashlight With LCD Screen
Rechargeable Led DVR Camera Flashlight HD 1080P Torch Camcorder With LCD Screen

Performance Features:

Photographed function
LED flashlight video recording digital camera, there is image sensor installed inside the flashlight, taking the static pictures can be realized, and image resolution can be set as you need that it not only can meet the demand of lighting, but also meet the demand of video-recording under the specific environment.

Video recording function
Flashlight camcorder, there is image sensor installed inside the flashlight, video recording function can be realized, and video resolution can be set as you need that it not only can meet the demand of lighting, but also meet the demand of photographing under the specific environment.

Practical function
LED flashlight video recording digital camera is small volume, light weight, and can be used by many ways like hand-held, leaning, hanging, etc to meet the demand of all kinds of work.

Instructions for use:
Power on: Press and hold the power button for 3 seconds to power on, display the boot screen, enter the camera mode, and press again
Press the power button to enter the power-saving standby mode.
Shutdown: After booting, press and hold the power button for 3 seconds, the shutdown screen appears, which can shut down the system.
Turn off the screen: After powering on, when the display is on, press the "Turn off" button to turn off the screen (that is, the display is in the screen saver state).
Take a picture: After turning on the camera, in the picture mode, press the picture button to take a picture (press the up or down key to adjust the focus of the camera).
Video: After booting, the system enters the camera mode, press the "M" setting key to enter the photo browsing mode,
Press the "M" setting button again to enter the camera mode, at this time press the camera button to start recording video (press the up or down button to adjust the camera focal length);

Precautions:
1. Please use the USB cable plug correctly. Do not use brute force to avoid damage to the USB socket.
2. Tighten the tail cap in time after charging to prevent foreign objects from falling into the USB socket.
3. Please fully charge the lamp when you use it for the first time, and charge it in time after each use.
4. If only lighting or signal indication is needed, the display screen can be turned off to avoid wasting electricity.
5. When carrying or transporting, make sure that the key switch is protected from foreign objects to avoid power consumption when the lamp is turned on.
6. It is strictly forbidden to hit or throw the lamp. If you accidentally drop the lamp into the aqueous solution, take it out and wipe it clean.
7. Do not illuminate the eyes directly with the light at will, because the strong light may damage the eyes.
8. Do not disassemble the structural parts of the lamp at will, especially the internal structural parts such as batteries and seals.

Charging method:
1. Unscrew the tail cap of the flashlight.
2. Connect one end of the USB cable to the USB interface of the flashlight, and one end to the charger with the USB interface, and connect the charger to an external power source. During the charging process, the indicator light of the charger is red, and the indicator light of the charger changes from red to green when fully charged. When the torch is completely dead, it can be fully charged after charging for about 6 hours. Unplug the charger and screw on the tail cap.