IP65 Electric Siren LED Strobe Warning Lights 3 Alarm Tones Adjustable
IP65 Electric Siren Alarm Led Light Warning Light Sound Alarm
Introduction
1. vehicle LED Strobe Warning Lights :Continuous alarm sound, high decibel, can detect the alarm in time.
2.Three kinds of alarm tones are adjustable, the tone is adjustable, and the selectivity is strong.
3. LED bulbs are used to emit light, with strong penetrating power and good use effect. The lampshade is available in various colors.
It is suitable for all kinds of special places, flammable and explosive places as mobile signal instructions or fixed warning signs. It is also suitable for municipal, construction operations and monitoring, ambulance, rescue workers for signal contact and position display.
Light Source | Power | W | 1W |
Life | h | 100000 | |
Electricity | rated capacity | Ah | 1.5 |
Rated voltage | V | 3.7 | |
Charging time | h | ≤3 | |
Life | cycle | 1000 times | |
Charger | input voltage | V | AC100~240 |
Continuous working time | h | ≥10 | |
Sound decibel | decibel | 100 | |
Applicable temperature | ℃ | -20℃~40℃ | |
Dimensions | mm | ф64x80 | |
Weight (including battery) | g | 220 | |
Enclosure protection grade | IP65 |
Major Functions&Features
Performance characteristics:
Sound and light alarm, loud and loud.
Beautiful appearance, small size, simple structure and light weight.
With magnetic adsorption at the bottom, it can be fixed on any metal that can be adsorbed, and it can also be carried with you, which is flexible and convenient.
High-performance lithium battery, good charging and discharging performance, low self-discharge rate, economical and environmentally friendly; high signal light source brightness, long life, low power consumption, continuous working time is more than 10 hours
Good waterproof performance, reaching above IP65.
The light-emitting angle is 360 degrees.
The shell is treated with special surface protection, which can work normally in a strong corrosive environment.
Matters needing attention:
◆ When carrying or transporting, make sure that the button switch in the middle of the lamp is protected from outside
Object contact pressure, so as not to lighten the lamp and consume power.
◆ When charging or discharging continuously in a place with high ambient temperature, the lamp meter
The surface temperature rises slightly, which is normal.
◆ Use a rag to wipe the surface after use in a corrosive environment