OEM Waterproof 80w 100w LED Explosion Proof Light Fixture 120L/M

Exposion Proof Lamp Factory Waterproof IP66 80w 100w Led Explosion-Proof Light For Gas Station

Range of application:

■ Widely used in petroleum mining, oil refining, chemical industry, military industry and other dangerous environment for general lighting and operational lighting;
■ It could work in Zone 1 and Zone 2 of explosive gas environment;
■ It could work in Zone 21 and Zone 22 of flammable dust environment;
■ It could work for T1-T6(T5) of temperature group;
■ It could work for energy saving renovation projects and maintenance & replacement for difficult places;
■ It could work for places with high protection requirements and poor wet environment.

Shell protection grade: IP66 pitch-height ratio: 2 anti-corrosion grade: WF2

■ Adopt imported Cree LED source, the average service life is up to100,000 hours, the power supply adopts wide voltage processing, which can realize constant current output and has short circuit and over voltage protection, greatly improves the service life of the lamp.

■The integrated streamline structure can better increase the heat conduction and further improve the heat dissipation performance.

Performance characteristics:
● The seal is made of high temperature and low temperature resistant silicon rubber material, and the enclosure protection grade is IP66, which is waterproof, dustproof and moisture-proof;
● The shell is made of lightweight aluminum alloy die-casting, which can resist strong impact. The surface adopts a special spraying process. The structural parts are made of stainless steel, which will never corrode and never
Rust
● The independent design of the shell heat sink ensures sufficient heat dissipation surface area. At the same time, each heat sink conforms to the thermal flow dynamics design to meet the heat dissipation area while ensuring the heat conduction cross-section, so that the heat generated by the LED can be efficiently and effectively exported to the shell (heat sink) surface in time , To ensure the heat dissipation performance of the LED, but also to ensure the service life of the LED, and design a heat conduction channel for each LED.

● The light source and electrical appliances are completely isolated from the cavity design, and there is an independent heat dissipation room, which increases the heat dissipation area, and completely solves the problem of electrical heat dissipation and heat radiation of the light source cavity. The power supply and the shell contact surface is placed with a heat conduction sheet, which can better handle The temperature of the electrical appliance is exported to the shell, thereby prolonging the service life of the power supply,

● Using high-quality, high-efficiency, long-life, environmentally friendly LED light source, with a life of up to 100,000 hours, truly achieving long-term maintenance free;
● Unique light distribution design to ensure that there is no dead angle in 360 degrees;
● The installation methods are flexible and diverse, and can adopt various installation methods such as seat type, wall type, ceiling type, lamp pole type, etc.;
● Wide voltage input, suitable for use in a variety of places with unstable voltage;
● Maintenance is simple, convenient and safe.
● The screw is designed with a non-loosening structure to prevent the screw from coming out after disassembly, and it is extremely convenient for installation and maintenance.

Ceiling installation, ceiling installation, light pole installation, ring installation, wall installation

Precautions:
● When transporting, put the lamps in the provided carton, and install foam to absorb the shock;
● When changing lights and wiping glass, you must turn off the power at the beginning and wait for the lamps to cool down;
● When in use, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon;
● When installing lamps, the lamps should be grounded nearby;
● Non-professionals are strictly prohibited from repairing and disassembling lamps.
Installation method