Rgb Led Smd Led Rgb 3w Component Chip Rgb Smd Led

Specification

Why Choose Us
1. Well-known chip material
2. 99.99% gold wire bonding
3. 2 years warranty
4. Over 10 years work experience technical service team
5. 24 hours service Professional sales team
6. Free Sample is available
7. Fast delivery
8.100% QC inspection Before Shippment
9. Aiming at the consult of "high quality, zero defect”, give you the best quality, best service.

Static Electricity
• Static electricity or surge voltage damages the High Power LED. It is recommended that a wrist band or an anti-electrostatic
glove be used when handing the LEDs.
• A tip soldering iron is requested to be grounded, An ionizer should also be installed where risk of static.
• All devices, equipment and machinery must be properly grounded, It is recommended that measures be taken against surge voltage
to the equipment that mounts the High Power LED.

Heat generation
• When the LEDs are illuminating, operating current should be decided after be considering the ambient maximum temperature.
• Please consider the heat generation of the LED when it is designed the PCB.
• The LEDs must be mounted on metal core PCB or heat sink or applied thermal pad.

Handing LED
Lianxinrui recommends the following at all times when handing LEDs or assemblies containing the these LEDs:
• When handing the LED with tools like Tweezer or Nipper, do not apply Mechanical Forces directly on LED's Surface.
• Do not touch with hand LED Lens surface directly. It may contaminate the Lens surface and affect on optical characteristics.
• LED should be handled from side because LED's molding material may be damaged with scratching on surface, piercing molding
material and broking wire.