HLG-320H-48 LED Driver Power Supply Meanwell 320W 48V Single Output Switching
Meanwell 320W 48V Single Output Switching Power Supply HLG-320H-48 HLG-320H-48A HLG-320H-48B HLG-320H-48C LED Driver
Features,
Description,
HLG-320H series is a 320W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-320H operates from 90~305VAC and offers models with different rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -40℃ ~ +90℃ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-320H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.
Applications,
‧LED street lighting ‧
LED high-bay lighting
‧Parking space lighting
‧LED fishing lamp
‧LED greenhouse lighting
‧Type HL for use in Class , Division 2 Ⅰ hazardous (Classified) location.
Packaging & Shipping,
Dimension:252*90*43.8mm (L*W*H)
Packing :1.88Kg; 8pcs/16Kg/0.92CUFT
Shipping
Usually by International Express. Other shipping methods are supported. Different shipping method costs differently.
We have stocks. Most common products would be sent out within 3 business days since you place an order.
If you have special requirement, please contact us. The manufacturing time for customized products would be 1~14 days.
Note
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently
connected to the mains.
9. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com. 11. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft). 12. For any application note and IP water proof function installation caution, please refer our user manual before using.