2020 New Flexible 8mm Single Side Neon Led Strip Led Neon Flex Light IP65
Product Parameters:
Model No. | FG0816-100D-12V |
Input voltage | DC12V |
Power | 9-10w/m |
Material | PVC |
LED Source | SMD2835 |
Package | 5m/Roll, 10m/Roll, 15m, 20/Roll |
IP rank | IP65 |
Warranty | 3 years |
Emitting color | red, green, blue, yellow, warm white, neutral white, pure white and purple |
Our product advantag:
1. Milky white and Colored Silicone jacket design.
2. Dome surface,continous and uniform illumination,no LED dot or dark spot.
3. Extremely flexible.
4. 100% waterproof ( IP65 level).
5. 100% breakage free.
6. Low voltage or line voltage options.
7. Durability,Impact Resistant,Weather Resistant,Minimal heat output(Safe to the touch).
8. Longer lifespan 50,000 Hours.
9. Easy to install(Cuttable on location).
10. Extremely low maintenance costs.
11. 90% less energy consumption of glass neon for design LED neon flex available in all single colors.
Applications:
♦ Building decoration.
♦ Car decoration.
♦ Amusement park and theater lighting.
♦ Emergency hallway lighting.
♦ Shopping mall, restaurant, hotel, meeting room and advertisement lighting decoration.
♦ Using prevent sulfide highlight LED light source.
♦ Flexible control, the lamp body soft, easy to shape.
♦ Appearance looks like a conventional glass neon tube.
Product Description:
Beautiful light effect: It also can be designed to work with DMX512 Controller or DALI dimming system. With the DMX System, it's possible to have multiple light effects like Color Runs, Gradual change, Water flow color changing, and more depends on the customer's request. Flexible and cuttable: LED neon light strip can be shaped, formed, or bent at any angle. It can be cut in every 1 CM/2.5CM without damaging the rest strips. Eco-friendly No splash and UY without mercury and no damage to humans and the environment.
Installation Process:
When used the led strip indoor, it will not have rain and wind, so it will be much easier. Every led strip will be 3M tape on the backside of the strip FPC, when installation, you can uncover the 3M tape, and stick the strip on the installation site. When meet the corner or the led strip is too long, as led strip in made up from many unit with 3 or 6 LEDs, you can just cut the strip by every unit.
When used the led strip outdoor, it will go through the rain and wind, many temperature change, after some time, the adhesiveness of 3M tape will become lower, so that the led strip will be fall from the installation site. So it is better to use some plastic buckles to fasten the strip. The way to cut and connect the strip will be same as the indoor use. Better to use some glue on the connect site to keep it all waterproof.