1W Red Safety Miner Helmet LED Mining Light with CREE LED Lights
Product Details:
GL-1000 Safety Miner Helmet cap lamp
1. Push the switch to the main light source position if necessary, the main Main light source is lighting.
2. Cap lamps could work continuously or intermittently, Push switch to adjust the light source when in the use of it.
3. The rated working current of cap lamps’ main light source is 0.15A, which can be illuminated for more than 15 hours; the rated working current of secondary light source is 0.1A, which can be illuminated for more than 28 hours when only use of it. The secondary light source can be available when main light source is failed or overworked to ensure the lamps long-life work.
4. This product has discharging protection function; when the battery is discharged to cut-off voltage of 2.9V, protection device will start automatically and turn off the discharge loop, the miner’s lamp is off and should recharge the battery before use.
5. Push the switch to secondary light source position if main light source is failed or secondary light source is needed
6. The range of CT is from 3000k to 8000k. It could be chosen according to your requirement within the allowable rang.
Technical Specification:
TECHNICAL PARAMETERS | ||||||
No. | Item | Value | Unit | Note | ||
1 | Rated voltage | 3.7 | V | |||
2 | Rated Capacity | 2.8 | Ah | |||
3 | Lighting time | Principal | >15 | hr | ||
Auxiliary | >28 | |||||
4 | illumination | Start of lighting | >4000 | Lx | 1m away from the lamp | |
lighting for 11hours | >3000 | |||||
5 | LED | luminous flux(Main illuminant) | 80 | Lm | ||
Current | Main illuminant | 0.15 | A | |||
Sub illuminant | 0.1 | |||||
Voltage | 3.6 | V | ||||
6 | BATERY | Capacity | 2.8 | AH | ||
Amperage of charge | 600 | Ma | Intelligent charger | |||
Battery Life | 500 | Cycle time | ||||
Battery storage life | 2 | year |
Product Pictures:
Samples:
Samples are avaliable for Testing and Market Test.
Warranty of Products:
Green Lighting provides warranty against defects in materials and workmanship, We strictly control every production process, the product provides 6 tests before leaving factory.
Guides and After-service Consultancy:
Green Lighting Team will offer these guides below
A .Need an Accessory?
B.Products Repair?
C.How to solve some quality problem?
Hours After-service consultancy just for you and to make your problems to solve easily.
OEM service:
OEM service of Green Lighting is strictly based on the ISO9001 ISO14001 quality assurance system.The TOP involves the effective teamwork of departments from Sales, R&D, and Engineering, Purchasing,production&QA, assuring a high quality product and prompt delivery for customers. The standardization of our quality system and the quality stability has earned us the trust of our customers for 9 years.