Outdoor Recreation Multi purpose LED hard hat headlamp , Miner Cap Lamp Hunting
1. Feature for Cordless Mining Lights
Wateproof grade : IP68
High Beam Brightness : >4000LUX
Anti-explosive grade : Ex ia
High Quality Material : Germany Bayer PC
Portable Light Weight : 171g , similar to the weight as a cell phone, more portable.
Multi-function lighting modes : main light - auxiliary light
Item | Value | ||||
Model | GST-2 | ||||
Light source | 1pc main light and 6pcs auxiliary lights | ||||
Battery capacity | 2.2Ah | ||||
Rated Voltage | 3.7V | ||||
Main light current | 200mA | ||||
Power of the main light | 0.93W | ||||
Illuminous | 117LUM | ||||
Brightness of the main light | 4000lux | ||||
Life span for main LED | 100000hours | ||||
Battery cycles | 1000 cycles | ||||
Working time | 13 hours | ||||
Weight | 171g | ||||
Water-proof grade | IP68 | ||||
Certified | CE,ATEX,EXIB II M1 |
2. General Guide PICTURES
3. Our products can be widely used for :
4. Product Advantages:
Safety : Over-charging protection , over-discharging protection, protection in electrical short-circuit,
automatic power-off on the socket , 100,000 hours LED’s Lifetime
Portability : All-in-one structure, Small in size , light in weight (only 171g for whole product),
inductive charging, easy usage
Efficiency : more than 15hours at full brightness, over 80hours at back up led brightness.Over4000lux
Brightness
Environmental : Li-ion battery is free for maintenance, and the material of li-ion is environmental, use
1Watt high power LED as the main light, and 6pcs backup LED’s to save power
Economy : three times longer than lead and acid cap lamp and saving in maintenance makes the product
more compatible in price
Charger input power : AC100-240V / 50-60Hz. Charging time: 6hours, continuous discharging time: more than 15hours at full brightness, over 80hours at back up led brightness.
Type of protection : IMI EXia IICT6 (Zone 1 and 2)
Protection category : IP68
5.Troubles and troubleshootings
Description | Analysis | Troubleshooting |
Light is not bright | Switch contact is bad / Led source is broken | Inspect switch, measure the circuit, If the switch contact is good, then check the voltage of LED and the circuit or contact with the manufacturer. |
Not Light enough time | Undercharge | First check the contact points, and then charge according to the regulation . |
New lamp use without cycle charge before | Precycling charge according to the regulations. | |
The Lifespan of battery is over | Replace the new lamp | |
Illumination is not enough | Low battery voltage | Measure the battery voltage, ensure charging time up to 7hours. |
The glass is serious pollution | Can wash the lens suface of lamp by water . | |
The lamp can't charge or long charging time | Charger (rack) breakdown or battery damages, charge manager fault | Check the charger 's output voltage and current , if all normal, check the battery , measure its internal resistance and capacity. If not up to technical requirements, replace charger or contact with the manufacturer. |
Can't rotate on fixed point | The screws of clip is started | Fasten the screw appropriately |
Correct Use:
The GREEN LIGHTING cordless cap lamp is a camera miner’s safety lamp.
The device is attached to a safety helmet, designed to accommodate front mounted attachments, and its power source, battery and housing, is integreted into the cap lamp housing.
The device is primarily designed for underground mining activities and emergency services.
Transportation: The transport process is not allowed by the severe mechanical shock and exposure Rain, prevent throw throwing , rolling, pressure .
Storage: miner's lamp should be stored at ambient temperature 0~40℃,relative bumidity of 45%-90%. Dry, clean ,and wellventilated, non-corrosive medium warehouse, should stay away frion fire and heat, If long-term storage, please filled to 80% of capacity, and charge about 5hours after three to four months.
CAUTION:
This product supports life and health in an underground environment.
Inappropriate use, maintenance or tampering may affect the function of the device and
therefore compromise the product’s ability to support life and protect against harm
ATTENTION:
When using the GREEN LIGHTING Cordless Cap Lamp the following safety instructions must be observed:
• Device shall be operated by qualified personnel.
• Before each use, check the functionality of the device.
• Be aware of the procedures for handling electrostatically sensitive electronics, which include GREEN LIGHTING cap lamps.
• This device contains electrostatically sensitive components. Do not open or repair the device without using appropriate electrostatic protection.
• Be aware of the warranty regulations.
• Do not charge in hazardous areas.
• Charge only with approved charging devices.
8.About us
GREEN LIGHTING TECHNOLOGY CO.,LTDis an expertised manufacturer of explosion-proof mining lamps which is located in ShenZhen area in china.Our factory has skilled experience in underground working lamps development and production. We focus on the development and innovation, and we pay more attention to great quality. We also have established our own marketing department for foreign sales.