IP68 Waterproof Silicone Seal Flexible Heavy-Duty Led Strip Light Professional For Tunnel, Underground

The Characteristics of Led Strip Light

- Color temperature, K: 3000K/4000K/5000K/6000K/7000K/10000K , RED, GREEN, RGB ;
- Lighting angle, degrees: 180 ;
- Number of LEDs, pcs / m: 60-80 LEDs/m;

- Luminous flux, Lm / m: 2000LUX;

- Rated supply voltage: DC12V/24V/36V/AC 110-130V/AC 220-240V (preferably switchable);
- MTBF: 45000 H;
- Degradation of luminous flux,% / year: 5-7%;
- protection against dust and moisture: IP68;
- LED Strip Housing Material: Halogen Free Food grade transparent silicon, flame retardant;

- Temperature for storage and transportation: -20 to 80degree celsius;
- Operating Temperature: - 40 / +70 ° C;
- Dustiness of ambient air, mg / m3, no more: 1000 mg/m3;

- Surge and surge protection;
- Power driver: 240W/480W/750W;

- For using In mines, hazardous by gas (methane) or coal dust.

LED Strip light Specification:

The Interior and Exterior Process of Led Strip Light

1. Material Quality: LED strip lights are made with bright LED chips, high-quality thermal performing PCB, Food grade transparent silicon, and an unmatched quality control process.

2. Illuminates: The LED strip light illuminates uniformly, completely eliminating the dark open space caused by the distance between the illuminators.

3. Luminous efficacy: The led strip light allows us to illuminate standard 5 x tunnels 5m, achieving a better quality of lighting from 80 to 90 lux.

4. Service lifetime: The led strip lights are made of silicone, a transparent flame retardant material, free of halogens and gases toxic, it is resistant to compression, moisture, and acidic water, with a useful life period greater than 5 years.

5. Plug and play system: Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labor-intensive and costly when running many meters of lighting. The LED Strip Lighting plugs into an existing power source using a power supply which then connects to one end of the LED strip. A single power supply will light a 20 meter LED section. To extend beyond 20 meters, just add another power supply at the other end and connect the next section of the LED strip – it's that simple.

6. Maintenance-free, Easy to repair: Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the LED strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in other led strips light – making it a quick and cost-effective fix.

7. We focus on your market, your product design, and basic safety. We recognize that without clients like you, we would have nothing more than a warehouse full of awesome products. From large mine projects to a basic construction light upgrade, we’re with you all the way. All items are securely shipped from Shenzhen, China.

8. Our super bright Series LED strip lights are the brightest found on the market today, enabling a wide variety of useful applications. Mining, tunneling, construction, industrial installers are using these very lights in many of the signs and buildings you see today.

IP68 WATERPROOF LED STRIP LIGHT COVERS WITH SILICONE SEAL

Led Strip Light Applications: Underground Mining & Tunnel & Industrial

Led Strip Light Tests Fulfilled

1.Flame Retardancy Testing
To ensure that the led light strip is fire retardant and self-extinguishing to the EN 60598-1:2008 standard.

2.Water Ingress Protection Testing
Conducted to ensure that no moisture enters the light strip to the IP68 standard.

3. Corrosion Immersion Testing
All accessories are subject to prolonged in-house corrosion immersion testing to verify the product's durability when exposed to weak Hydrochloric Acid, Alkali, and Sea Water Spray.

4.Restriction of Hazardous Substances Light Strip Testing
For Cadmium, Lead, Mercury, Hexavalent, chromium. Polybrominated Diphenyl Ethers (PBDEs) to verify compliance with GB and MA Directive.

5.Flexible Lighting Products Testing
All 24-240 Volt strip lighting/accessories are tested to the Flexible Lighting Products standard.

6. Weight/Tensile Strength Testing
All Green Light led strip lighting and its connectors are subject to in-house prolonged weight/tensile strength testing to ensure that they have the required strength and are suitable for the harsh conditions they will be subjected to.

7. Impact Testing
All Green Lighting strip lighting is subject to in-house impact testing to ensure that the product has the required impact strength.

8. Photometric Testing
All Green Light strip lighting is subject to Photometric Testing in accordance with the Everfine Goniophotometers System Test to verify that the specified amount of luminosity is continuously available from the high-grade LED’s that are used.

9. Lifecycle Testing
All Green Light strip lighting is subject to in-house Lifecycle Testing whereby it is energized 24 hours a day, 365 days a year to monitor and test for any signs of a drop in luminescence, or any other form of deterioration.

10. High and Low-Temperature Testing

All strip lighting is available at the temperature of -40 to 80 degrees, to ensure the different working conditions.

Led Strip Light FAQ:

Q: Could I put my own logo on the products?

A: Sure, your logo can be put on every strip light, either by laser or by molds.

Q: Could I put my own designs on the products?
A: Of course, you can send us your design, we'll follow your design.

Q: Can I have some samples before the formal order?
A: Yes, we can send you some samples for your test before your order.

Q: How long is the lead time?
A: Normally we keep stock for most products, the lead time is 1-5 days as soon as the payment is released.

For customized products, it takes longer.

Q: How about the after-sale service? What are the Warranty terms?
A: We offer 12 months for every product we sold. If you meet any problems after sales, pls contact us freely, we'll help to solve the problems within 24 hours.

Q: Are you a manufacturer or just a dealer?
A: We're manufacturer, we do produce all products by ourselves. Welcome to visit our plant at any time.

Q: What are the payment terms? Can I pay after you got the products?
A: Normally we accept TT and western union, Paypal. L/C is also accepted if the order quantity is large.

For old customers, we'll guarantee monthly payment after a good cooperation ship.

Q: I couldn't find the products I want in your catalog, can you develop them for me?
A: Yes, we have a research & development dept., we're willing to develop everything that you demand in safety lockout industries.

Q: Do you have any offices in other countries?
A: Currently we don't have, but we're discussing with some good customers. If you're willing to be our agent in any country, pls contact us freely.

Q: May I take goods by air?
A: yes, you can by air, by express, by sea up to options.