Waterproof IP67 Outdoor ac to dc 12v 24v LED Driver,LED transformer, switching adaptor for LED street light

Specification

INPUT FEATURE
INPUT VOLTAGE RANGE:90Vac to 264Vac
RATED INPUT VOLTAGE: 100Vac to 240Vac
INPUT FREQUENCY RANGE: 47Hz to 63Hz
RATED INPUT FREQUENCY: 50Hz/60Hz
INPUT CURRENT:0.5A max.&100Vac.
INRUSH CURRENT: 30A max. at 100-240Vac input for a cold start at 25oC.
EFFICIENCY: higher than 83% at 100-240Vac input and output full load(2.5A).

OUTPUT FEATURE
Unload output regulation 11.4VDC 12.6VDC
Rated load output voltage 11.4 VDC 12.6 VDC
Rated output current 0.0 A 2.5A
Short-circuit output power Hiccup mode hiccup(3W)
Line regulation ≤1%
Load regulation ≤5%
Ripple and Noise (20MHz Bandwidth 10uF Ele.Cap. & 0.1uF Cer. Cap.) ≤100 mVp-p.
Transient response (Output load change from 20% to 80% of full load(2.5A)) ≤350mV

PROTECTION FEATURE

OVER - CURRENT PROTECTION: The power supply shall be hiccupped and no damage shall
occur when output current reaches to its over-current protection trigger point (set@ Max load
120-300% ). The power supply shall be self - recovery when the fault condition is removed.

SHORT - CIRCUIT PROTECTION: The power supply shall be hiccupped(input power less than
3W) and no damage shall occur when any output operating in a short circuit condition under any
line condition for an indefinite period of time. The power supply shall be self - recovery when the
fault condition is removed.

OVER - VOLTAGE PROTECTION: The power supply shall be hiccupped and no damage shall
occur when output current reaches to its over- voltage protection trigger point (set@ Max output
voltage 120-180% ). The power supply shall be self - voltage when the fault condition is removed.

ENVIRONMENTAL CONDITIIONS
OPERATING: The power supply shall be capable of operating continuously in any mode without
performance deterioration in the following environmental conditions.

Ambient Temperature: 0℃~40℃

Relative Humidity: 10%~90%
Vibration: 1.0mm, 10–25Hz, 15 minutes per cycle for each axis (X, Y, Z)

NON-OPERATING: The power supply shall be capable of withstanding the following
environmental conditions extended periods of time, without sustaining electrical or mechanical
damage and subsequent operational deficiencies

Ambient Temperature: -30℃~70℃

Relative Humidity: 10%~90%

Vibration and Shock :The power supply shall be designed to withstand normal transportation
vibration per MIL–STD-810D, method 514 and procedures X, as it is mounted in the chassis
assembly and packed for shipping.

Drop Test :Power supply product can in transport process, because the accident
drops into its ground and cement ground( tallest 1.55 Ms)s fall in in proper
order for Mitsubishi six,without sustaining electrical or mechanical damage and
subsequent operational deficiencies

2. Types available

DC 12V 30W/60W/100W/200W

DC 24V 30W/60W/100W/200W