14.4W 60LEDs per meter LED RGB Strip Lights12Volt 24volt SMD5050 5m 72W

Features:

1. Classical flexible RGB strip.

2. Double layer pure copper PCB.

3. 3M adhesive tape ,easy to install.

4. High brightness SMD5050.

5. 120 degree.

6. Strandard 5 meters per roll,cuttable every 6PCS LED at the mark.

7. Flexible and reliable with CE&RoHS

8. Warranty 2 years.

Descriptions:

Application area:

· Cove lighting

· Architectural lights for canopy, archway

· Backlight or edge lighting for signage

· DIY lights for home use

· Path and contour marking

· Decorative lights for holiday, event, show, exhibition, hotel

Using Notice:

· The LED RGB strip light itself and all its components may not be mechanically stressed.

· Assembly must not damage or destroy conducting paths on the circuit board.

· Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations.

· Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip.

· Parallel connection is highly recommended as safe electrical operation mode.

· Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip.

· Please ensure that the power supply is of adapters power to operate the total load.

· When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface.

· Pay attention to standard ESD precautions when installing the strip.

· Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.

· Caution needs to be taken while doing the connection after cutting the strip. Only authorized professionals can do the work to enable it waterproof in wet locations.

Typical Connectting Diagram