USA Warehouse 16W Back UP Driver Used With LiFePO4 and Ni-Cd Battery And 5 Years Warranty
Product description
- Suit for 10W to 300W lamp with internal or extemal led driver
- 10W-300W lamp must be with 0-10V dimmer function
- Used with Lifepo4 and Ni-cd battery
- DC150-200V output
- LED emergency converter that can transfer standard LED
- fitting into emergency LED fitting
- Accessary test switch and charge indicator
Applications
- UL Listed for dry / damp locations
- For use on a wide range of LED fittings to convert them from
- standard to emergency fitting
- Outout DC150-200V
- Additional Relay that can control standard LED driver
- Deep discharge protection
- Ambient range ta 0 . 50C
- IP20 protection
- Not intended for use in luminaries for high-risk task area lighting
LSED suit for below lamp
- 10-200W lamp with internal led driver
- LSEDA16W ,LSED16W
16W above lamp must be with 0-10V or 1-10V dimmer.
Lamp power must be ≤15W(1W extra power) when dimmer is at the lowest voltage.
After-Sale Service:
1. Quick reply on customers' questions;
2. If anything goes wrong with the products' quality, we will replace for you free
3. Make you a happy ordering.
Product Name | LED Back Up Driver |
Power | 16W |
Rated input voltage | 100-277VAC,100-347VAC,50/60Hz |
Input current | 120mA max |
Input power | 8W max |
Power factor | 0.6 @100VAC, 0.5@347VAC |
Recharge time | 24hours |
Discharge time | 90 minutes |




Dallas Warehouse Introduction:
Ledsion Lighting have its own warehouse in the United States, Located in Dallas, TX 75247. Warehouse area up to 50,000 square feet.
