LCD-CESP LIGHTING,CO., LIMITED

Quality serivce and customer requests first  

Concept/customer request Design----->>Planning--->>program Approved.--->>Product design &Developements---->>Trial Product--->>>Planning --->>>Pilot product --->>>Process layout &Development--->>>Product and process validation check--->>>Mass production .

Machinery processing

Lighting Fixture processing

Wiring device processing

1. LED OCB Assy'y
• Attach LEDs chip capacitor etc & other circuits to PCB Board.

2. LED PCB JUMP LINK
• Link the PCB jump after attaching LED PCB Assy'y to the base.

3. Assembly

• Assemble driver, heat-sink housing, side cover etc & diffuser cover or lenses etc.

4. Light Test
• Light Test

5. Vision Test
• LED lighting brightness test.

6. On/Off Test

• LED lighting On,Off test

7.Aging Test
• Heat-Resistance test

8. Electrical Test
• Electrical characteristic (W,A.)test

9.Final Test
• Final external/Function test

10.Packing/Shipping
•Product packing /Outgoing

LCD-CESP has 3 production lines and 3 groups of products:

Regular LED lighting, Hazardous LED lighting and customized LED lighting products.

All our products have the following features:

Heat sink housing, Die cast forming section and SMD LED chips.

Our driver production and all our lighting products are age tested to meet the highest standards.

Compliance with ISO 9001:2008 and ISO 14001 quality management systems.

Our policy is to meet all customers’ requests and exceed their expectation.

Developing with multi-task team that composed with expertise from every function (planning, sales ,R&D, production,purchasing ,quality control other collaborator. Applied simultaneous technology to develop customized products.

Design : Design expertise Co-working----->>Engineering Design : Eng.Analysis,lens,reflecting mirror simulation and design technoligy--->>Molding /Fixture Design: Precision molding tech. & process control technology.--->>Circuit Design : Electronic circuit Design applied circuit Design technology------>> Reliability : Electric products / parts reliability Evaluation.

1. Define lighting requirements
• The design goals can be based either on an existing fixture or on the application’s
lighting requirements.

2. Define design goals
• Specify design goals, which will be based on the application’s lighting
requirements.
• Specify any other goals that will influence the design, such as special optical or
environmental requirements.

3. Estimate efficiencies of the optical,
thermal & electrical systems
• Design goals will place constraints on the optical, thermal and electrical systems.
• Good estimations of efficiencies of each system can be made based on these
constraints.
• The combination of lighting goals and system efficiencies will drive the number of
LEDs needed in the luminaire.

4. Calculate the number of LEDs
needed
• Based on the design goals and estimated losses, the designer can calculate the
number of LEDs to meet the design goals.

5. Consider all design possibilities
and choose the best
• With any design, there are many ways to achieve the goals.
• LED lighting is a new field; assumptions that work for conventional lighting
sources may not apply.

6. Complete final steps
• Complete circuit board layout.
• Test design choices by building a prototype luminaire.
• Make sure the design achieves all the design goals.
• Use the prototype to further refine the luminaire design.
• Record observations and ideas for improvement.

developing with multi-task team that composed with expertise from every function (planning, sales ,R&D, production,purchasing ,quality control, other collaborator) applied simultaneous technology to develop customized products

Design: 4 people

Molding/Fixture : 30 people

Engineering Design: 5 people

Reliability : 5 people

Circuit Design: 3 people

The other clerks: 30 people

LCD-CESP specialises in the design and manufacture and help of high quality LED lighting fixtures and instrumentation systems and specialist lighting for both land and sea applications including marine deck light, spot light and searching light and oil & chemical plant etc Explosion proof LED lighting and heavy duty industrial mining or Hot DIP Galvanizing Plant etc hazardous and harsh location LED lighting.

Over the years LCD-CESP has become a proven and long standing supplier to the Europe and the USA and all aroud of world projects including the chemical, vessel, sea port, food plant, mining, stadium, airport, warehouse, factory, parking a lot, road, etc. LCD-CESP continues to build its reputation for quality, reliability and service in all aspects of marine or hazardous location engineering light, The company has also consistently moved ahead of the times and kept well abreast of modern technologies. In oil or mining, in explosion proof lighting and in LED universal applications too, LCD-CESP today is at the very forefront of design, engineering technology and supply, brightening up the way of oil & mining workers working, safely and efficiently illuminating hazardous areas and providing tent lighting for military personnel accommodation in and around hostile areas. In all these applications, the company uses state-of-the-art LED technology which is designed to meet the low energy, high efficiency and environmental lighting demands of the modern world.

LCD-CESP has over 1000 LED modules and fixtures suitable to customize to your designs and configurations.

Our R+D team will assist ODM,OEM design support and rebrand for your markets.

We can offer all LED technology and services from our new factory:

Fabrication and Finishing

Laser cutting

Metal pressings

Press Brake

Welding and polishing

Milling

CNC turning and milling

Injection moulding of plastic parts.

Die-casting.

Our LED hazardous and harsh area products are suitable for Mining, Marine and Offshore applications, Ports, Airports,Cold storage, Waste treatment plants, Industry, Sports grounds, Roading and Residential.