High Bay Explosion Proof 10 Watts Led Flood Light IP65

Explosion proof led high bay lighting 10W 220VAC 50/60Hz 65000K 1300lm IK08 IP65

ATEX LED Batten floodlight introduction

The light is designed with type of protection “Ex nR” and is available in three standard sizes.

For the electrical connection, two M20x1.5 cable glands are provided to house the cable glands or blanking plugs, approved for the explosion protected area. The batten light fitting may be installed using wall / ceiling / pendant as well as pole mounting.

Benefits

• Lights for every application
• Wide range of accessories
• Extensive services

Industries

• Oil & gas
• Pharmaceutical industry
• Chemical industry
• Mechanical engineering/OEM
• Energy

Marking
II 3G Ex nR IIC T6 G
II 3D Ex tc IIIC T80 ℃ Dc IP66

IECEX Standard

EN 60079-0:2012/A11:2013; IEC60079-0:2011 Edition 6.0; EN 60079-15:2010; IEC 60079-15:2010 Edition 4.0; EN 60079-31:2014; IEC60079-31:2013 Edition 2.0.

Power range

Zones 2 & 21or 2 & 22

Linear type luminaire

LCD-BHD51 Ex LED luminaire is also intended for general lighting industrial high bays and:
• spaces classified to zone 2,22 (optionally 21) hazardous by dust, gas, vapour and mist of flammable
liquids explosion in temperature class up to T6
• luminaire for indoor or outdoor use
• additional spaces where occurence of high dust concentration and water splashes are possible, such as:
boiler-rooms, wash-rooms, garrages, island station roofs, warehouses, processing lines for chemical industry,
oil and gas industry,loose mining and building material industry etc.

Advantages

• robust and compact design
• quick, simple and easy installation
• optional installation of lampshade on hinges during
fluorescent lamp replacement
• high resistance to a corrosive industrial environment,
• high luminous efficacy- 0.9
• high-quality ignition systems
• UV-resistant

CONSTRUCTION

LCD-BHD51 series of explosion-proof LED linear light is designed and manufactured with a small size, light weight, long life, pollution-free, maintenance-free, safe, energy saving, durable and environmental-friendly Explosion-proof LED linear light.

Housing: high light transmittance PC material , the strength of more than 4J, can reduce the damage to the light in the abnormal operation.
Diffuser: PC polycarbonate plastic
Gasket(waterproof O-ring): Nitrile rubber, good aging and corrosion resistance.
Light shell: Aluminum alloy high pressure die-casting, with good microstructure, hardness and wear resistance

Fasteners: STS304 stainless steel with high corrosion resistance and high strength
The light fitting accessories and lamp housing split structure design, easy installation and maintenance; selection of imported light source chip energy saving, environmental protection, high brightness, life expectancy up to 100,000 hours.