5 Years Warranty SMD3030 30W Waterproof LED Flood Light

Waterproof led flood light 30W 220VAC 50/60Hz 170lm/w 6500K beam angle 15 degree

1. This is an ROI example you can achieve by retrofiting 68 HID luminaires with PowerForm

• * 71%Annual
• savings over HID.
• * 50%Fewer luminaires
• than existing HID
• * 2.43
• Payback in years

2. PowerForm site & area PFAS

• * IP66 Rated Luminaire
• IP66-rated optical assemblies and electrical housing.
• * Die-cast housing
• Rugged, die-cast aluminum housing for maximum durability.
• * Mounting
• Standard arm mount and slipfitter available.

3. Datasheets for 10~30w FK floodlights

Save energy and money with your new area and flood solution!

CAUTION

RISK OF PRODUCT DAMAGE

• Never connect luminaires and/or components under load with supply voltage turned on.
• Do not mount or support these luminaires in a manner that can cut the outer jacket or damage wire insulation.
• Do not restrict fixture ventilation. Allow for some volume of airspace around luminaire. Avoid covering luminaire with insulation, foam or other material that will prevent convection or conduction cooling.
• Do not exceed luminaire maximum ambient temperature.
• Do not modify the luminaire.
• Only use luminaire in its intended application and location.
• Led products are polarity sensitive. Ensure proper polarity before installation.
• Electrostatic Discharge (ESD) can damage LED. Personal grounding equipment must be worn during all installation and servicing of the luminaire.
• Do not touch individual electrical components as this can cause ESD, shorten LED life, or impact LED performance.
• Always read the luminaires complete installation instructions prior to installation for any additional luminaire specifific warnings.
• In the case of HID or Fluorescent luminaires, regular re‐lamping is required to keep luminaire operating within safe limits
• Do not install damaged product. Handling and installing damaged products can potentially increase the risks mentioned In case of damage and/or missing parts upon arrival of the luminaire, please contact us.
• These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with instal‐lation, operation or maintenance.
• Please see luminaire specifific Installation and Maintenance Instruction for additional warnings or any applicable LCD or regulatory statements. Failure to follow any of these Instructions could void luminaires warranties.

Luminaire Maintenance

• Regular luminaire maintenance programs are recommended.
• It is recommended to clean the outside of the luminaire and the refractor/lens.
• Frequency of cleaning will depend on ambient dirt level and minimum light output which is acceptable to user.
• If clean water is not sufficient for cleaning, use a neutral, synthetic, not‐scratching and not‐abrasive cleaning substance.
• Never use alkaline and/or acetous cleaning substances.
• Make sure that the cleaning substance is carefully removed by rinsing with lots of clean water.
• LCD recommends using a cleaning solution that has a PH between 5 and 8.

Product Photos:

3. Datasheets for 10~30w FK floodlights