Exterior 20W 12V IP66 Cool White LED Security Flood Light

Exterior led flood light fixtures 20W 12VDC waterproof IP66 3300lm IK08 4000K

FK™ LED Flood Light, 20W, 3300 Lumens, 4000K, Mounting Bracket

Replace traditional Metal Halide Flood Lights and save big with our energy efficient LED Flood Lights. FK™ LED Flood Lights are perfect for landscape, signage, and accent lighting in heavy commercial and residential applications. Chip-On-Board LEDs are coupled directly to the housing and provide a service life of over 50,000 hours.

Features:

• SMD LEDs have low power consumption, high efficiency and a long service life of over 50,000hours.
• Housing consists of high quality, corrosion resistant, and anti-cracking die cast aluminium
• CE, RO listed for wet locations, IP65 Rated
• Certifications: UL, cUL, DLC, FCC, SAA, CE, RoHS, CB, C-TICK
• Suitable for use in -40F to 122F

CAUTION

RISK OF PRODUCT DAMAGE

• Never connect luminaires and/or components under load with supply voltage turned on.
• Do not mount or support these luminaires in a manner that can cut the outer jacket or damage wire insulation.
• Do not restrict fixture ventilation. Allow for some volume of airspace around luminaire. Avoid covering luminaire with insulation, foam or other material that will prevent convection or conduction cooling.
• Do not exceed luminaire maximum ambient temperature.
• Do not modify the luminaire.
• Only use luminaire in its intended application and location.
• Led products are polarity sensitive. Ensure proper polarity before installation.
• Electrostatic Discharge (ESD) can damage LED. Personal grounding equipment must be worn during all installation and servicing of the luminaire.
• Do not touch individual electrical components as this can cause ESD, shorten LED life, or impact LED performance.
• Always read the luminaires complete installation instructions prior to installation for any additional luminaire specifific warnings.
• In the case of HID or Fluorescent luminaires, regular re‐lamping is required to keep luminaire operating within safe limits
• Do not install damaged product. Handling and installing damaged products can potentially increase the risks mentioned In case of damage and/or missing parts upon arrival of the luminaire, please contact us.
• These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with instal‐lation, operation or maintenance.
• Please see luminaire specifific Installation and Maintenance Instruction for additional warnings or any applicable LCD or regulatory statements. Failure to follow any of these Instructions could void luminaires warranties.

Luminaire Maintenance

• Regular luminaire maintenance programs are recommended.
• It is recommended to clean the outside of the luminaire and the refractor/lens.
• Frequency of cleaning will depend on ambient dirt level and minimum light output which is acceptable to user.
• If clean water is not sufficient for cleaning, use a neutral, synthetic, not‐scratching and not‐abrasive cleaning substance.
• Never use alkaline and/or acetous cleaning substances.
• Make sure that the cleaning substance is carefully removed by rinsing with lots of clean water.
• LCD recommends using a cleaning solution that has a PH between 5 and 8.

Product Photos: