Waterproof IP65 15000 Lumen LED SMD Flood Light 100W

15500lm waterproof IP65 100W asymmetric wide beam LED SMD Flood Light for 6500K

Description

Flood lights have come a long way in the past couple of years with LED technology. When LED's were first introduced they were very useful and good for lower brightness, products like globes or LED strip lights achieved this. This was because they were not as efficient as they are now. If the manufacturer turned the brightness up on the...

100W FS-100 Floodlight

Light Technical

Upward light output ratio 0
Standard tilt angle posttop 0°
Standard tilt angle side entry 0°

Operating and Electrical
Input Voltage 100 to 277 VAC or 12-28 VDC
Input Frequency 50 to 60 Hz
Inrush current 340 A
Inrush time 0.025 ms
Power Factor (Min) >0.95

Controls and Dimming
Dimmable on requests 1-10V , DALI , Triac

FS Family

Mechanical and Housing
Housing Material Aluminum die-cast 6063
Reflector material Polish Aluminum
Optic material Acrylate
Optical cover 4mm temper Glass
Fixation material corrosion resistant powder coating carbon Steel
Mounting device Mounting bracket adjustable
Optical cover Flat
Optical cover Clear

Approval and Application
Ingress protection code IP65 [ Dust penetration-protected, jet-proof]
Mech. impact protection code IK08 [ 5 J vandal-protected]
Surge Protection Luminaire surge protection level >2 kV

Initial Performance (IEC Compliant)
Initial luminous flux (system flux) 13500-15500 lm
Luminous flux tolerance +/-6%
Initial LED luminaire efficacy 130-160 lm/W
Init. Corr. Color Temperature 3000K 4000 K 6500K
Init. Color Rendering Index ≥75
Initial chromaticity (0.380, 0.390) SDCM <5
Initial input power 100 W
Power consumption tolerance +/-10%

Product cut sheet

Over Time Performance (IEC Compliant)
Driver failure rate at 7000 h 0.5 %
Useful life L80B10 100000 h
Lumen maintenance at useful life of 100000 h,at 25 °C
Application Conditions
Ambient temperature range -30 to +45 °C

Photometric data