Open Area Led All In One Solar Street Light With Pole Bridge Lighting 150w

Product quick detail:

During working time ,when there are movements detected ,the lamp switches to

100% capactity ,when movements gone ,the lamp turns to 50capacity to save power

Product features:

1. Mode: The smart lighting system is fully automatic & programmable, and by default,

the light will come on automatically at sunset and will run until dawn.

2. Programmable: The unit's control module can be conveniently wirelessly programmed,

and can be completely customized and remotely controlled to suite a variety of applications

(eg., stay illuminated for a set amount of time, operate for a set number of hours after sunset,

turn off (or dim) a few hours before dawn, etc.)

3. Battery Power: With a lifespan of 5 – 8 years, our LiFePO4 batteries provide illumination

for up to 15 nights on a charge, and recharges to full capacity in about 13 hours during the day

with the sun. FCC certified for use in the USA.

4. Construction: High quality, reliable and elegant -- the waterproof IP66 aluminum alloy and

toughened glass housing integrates the solar panel, the replaceable battery, LED, and the control

module all into one unit. Can be mounted onto a standard 3.0" pole or a flat surface virtually

anywhere - no wiring needed. Mounting bracket only for a pole is included.

5. Distribution Pattern: It can be supplied with a Type

Prdduct application:
The regions with sufficient sunshine is a must for a solar-powered facility to work normally.

The same principle applies to all in one solar street lights. Furthermore, as an off-grid solar-powered

product, all in one integrated solar street lights can be used in remote areas where there is devoid of

the infrastructure of the power station, such as islands, famous mountains surmounted by beauty spots,

or some countryside. However, as lighting products, all in one integrated solar street lights are mainly

installed in the outdoor sites where illumination is required at night.

1. Roadways

Fixtures: roadway lighting, street lighting

Locations: highway, road, motorway, lane,

Roadways represent a variety of ways for vehicle traffic. These ways require narrow beam angle across

the road and wide beam angle along the road, for this can increase pole spacings and reduce the

numbers of streetlights on it.

2. Open Areas

Fixtures: parking lot lighting, park lighting, playground lighting, airport lighting, outdoor security

lighting(sometimes with cameras)

Locations: airport, park, garden, parking lot, playground, tennis court, outdoor basketball court, intersections.

Open Areas often connect vehicle traffic to pedestrian traffic, including the locations with public activities,

such as the park, garden, and the

places where security monitoring is always processing, such as parking lot, intersections.

these areas need illumination solution at night for either human activities or the scrutiny of the safety and security.

3. Pedestrian Areas

Fixtures: pathway lighting

Locations: plazas, courtyards, and pathways

Pedestrian areas indicate the transition between the building and its surrounding sites since these transition

areas cover irregularly shaped spaces, more lighting distribution types may require for this kind of projects.

4. Site Perimeter

Fixtures: Perimeter lighting, site lighting,

Locations: factory perimeter, industrial zone perimeter

Some sites, for instance, your villa, require illumination around its perimeter and exclude illumination

onto the site itself, for at night you do not expect the street light trespass on your private space, especially bedroom.

Product advantages:

1. Battery

Compared with lead acid batteries, lithium batteries are lighter, smaller, with longer lifespan, what is more important is that lithium batteries are with larger capacity at the same volume.

2. Light source

Compared with MH/HPS bulbs, LED takes up far less space in the lamps

3. No wiring, and easy to install within a few minutes

There is no complex wiring process, even if you are the end-users, you do not have to be with an engineering background or skills of setting electrical equipment, all you need to do is fixing the product with 12 pieces of fastening screws. Your family will stand to benefit from the free solar energy all the time.

4. 60% less energy consumption, which also means more days of autonomy

The light sources of most conventional solar street lights were Metal Halide(MH) or High-Pressure Sodium(HPS), which luminous efficacy is only 60-80 lumens per watt. However, nowadays, the cutting-edge LED lighting technology has dramatically boosted it up to about 200 lumens per watt. People can get the same brightness at night by consuming much less energy from solar batteries.

All in one solar street lights with this kind of light source easily realize 5+ days autonomy, making it possible to work normally in places with rainy seasons or less insolation.

5. Better hurricane/typhoon resistance ability

All in one integrated solar street lights are designed with compact structure, compared with that of split-types, which solar panel are separated from the lamp. This kind of structure has better performance in withstanding hurricane/typhoon.

FAQ:
1. What are the information you should give us to best customize our solar lights?
(1)The sunshine hours per day or the exact city where the street lights will be installed in.
(2)How many continuous rainy days in the raining season there? It matters because we
have to make sure the light can still work in 3 or 4 raining days with little sunshine.
(3) The height of the poles, or the width of the road.
2. How does an all in one solar street street light work?

(1) First, the solar charge controller will turn off LED lights towards dawn once solar panel

voltage rise to 5v, which is accounted for a little sunlight in the morning.

When there is enough sunshine during the day, the solar panel will work together with the

solar charge controller to collect the solar energy.

Commonly, in a 12v solar system, with the effect of insolation, the voltage of its solar panel

will rise to around 18v so as to charge the 12v battery bank. Meanwhile, the solar charge controller

will prevent overcharge to protect the batteries.

(2) When there is not enough sunlight towards dusk and solar panel voltage drops to a value

under 5v, the LEDs will be turned on accordingly.

“Time control mode” and “Motion sensor control mode” will be working during discharging at night.

As primary function, Time control is used to customize different brightness in different time slots.

For example:

Time slot 1: 6:00 pm – 7:00 pm, 50% brightness

Time slot 2: 7:00 pm – 8:00 pm, 70% brightness

Time slot 3: 8:00 pm – 10:00 pm, 100% brightness

Time slot 4: 11:00 pm – 2:00 am, 50% brightness

Time slot 5: 3:00 am – 5:00 am, 30% brightness And so on.

3. How does the light know when to turn on and turn off?
Bright New Energy's solar controller uses a photocell or timer to control when the light should turn on or turn off.
The photocell detects if the sun comes up or goes down. The solar controller utilizes an internal timer that is
pre-set for a specific time to determine when to switch the light off.
4. How many hours need to install solar LED street light?
It is easier to install than other types of street lights. It takes about 1 hour to install completely.