All In One Decoration Solar Street Lights Backyards Efficient 150w Free Guarantee

Product quick detail:
1. The die-casting integrated solar street light uses the Imported light beads to

provide superior lumen output, 140 lm/W (lumen/watt), long-lasting stability

and excellent visual sense.

2. The LED lights will work at night automatically. The factory default working mode:

light on at night, light off at day automatically. (You can also customize the working

mode according to the customer’s requirements).

3. Electronic switch instead of traditional button, avoid some issues because of the

traditional switch flick automatically on transportation. Die-casting design, the manufacturing

process is more delicate, the appearance is more exquisite, the function is more powerful.

Product features:
1. Run time of a day: 13 hours
2. 4000-8000lm Lumen flux
3. Die casting Aluminum+Insulation flame retardant engineering plastics
4. Bright control system
5. Rain or cloud resistance: 15days
6. Operation environment: -40℃ ~ 80℃

Product application:
1. Paths, laneways, carparks.
2. Entrences, roads, gates.
3. Where wiring is not economical or practical.
4. Courtyards, playgrounds.
5. Entrances and exits, muster areas.
6. Outside storage areas, perimeter lighting, etc.

Product advantages:
1. Engineering plastic housing, high strength, effective rustproof.
2. High Efficiency Monocrystalline Solar Panel.
3. Adopt high-capacity Lithium iron phosphate battery.
4. Wider receive sunlight all year.
5. Using light control system, turn on when dark, turn off when days.
6. Easy installation: It only have a light head and solar panel, you just need to install it

one the pole. No cable;

Product installation:

1. Choose the best location for lighting to make the base of the pole firstly, the pole is

recommended to use the height of 5-9 meters, the upper diameter of 60-110mm, the

thickness of pole is greater than 2.3mm outdoor anti-rust paint iron or hot dip galvanized

steel pipe material.

2. Open the package and check whether the accessories are complete.

3. Before installing, adjust the angle according to you need to set, and use a special plug

to fix the position of the lamp cap and fasteners before continuing to tighten the screws.

4. The integrated lamp and the lamp post are fixed to each other, and it is necessary to

tighten the hoop with screws.

5. After confirming that the screw is fully tightened between the lamp and the lamp post,

press the switch on the rear of the lamp and stand up the pole, then the lamp will work automatically.

light on at night, light off at day automatically.