Highbay light 80W 120W watt EC certification led ufo high bay

First of all, please allow me to introduce our company Ningbo die-casting man to you,

Die-casting Man is one of the lighting manufacturers with design ,development and production. We understand that lighting technology has to be practical,so we always design and develop with our customers needs in mind.

For this series, we designed total of three sizes models, to deal with three different wattage requirements,The minimum power can be 80 watts, the maximum can reach 200 watts.

Prodcut Specification

YAHB-05-100

Is there anything else you want to know about this lamp?
1. Q:What is the waterproof rating?
A: It’s can pass IP66
2. Q:How many years of warranty do you promise?
A: We guarantee the housing for 5 years.for the whole lamp,The warranty of electrical parts is depends on the warranty time of different driver brand.
3. Q:What is the grade of your powder coating?
A: Normal is C2 grade,but If the customer has special request,such as used at the seaside,in this case,we can use phosphating with Akzo powder to reach higher levels,like C3,C4.
4. Q:What's the packing you use?
A: Our packing is PE bags with foam and carton box,we will ensure it safe.
5. Q:What is your usual lead time?
A: 25 days for regular products, 10 days extra for special requirements.

6. Q:Do you sell only whole lamps?Or I can just buy the empty housing?
A: It’s up to you,we can also sell empty housing,even you just by the die-casting housing without powder coating is also no problem.
7. Q:What brand of driver do you use?
A: The brand we usually use is Inventronics,Sosen these China local brand,and PHILIPS,MEANWELL these international brand,Customers can also specify brands,it’s no problem.
8. Q:About the powder coating,i have a question,What colors do you usually use?Can we customize the color?
A: The colors we usually use are black and gray,you can also customize other color,just tell us the RAL number,we will according the RAL number to do the powder coating.
9. Q:Ok,that’s good,So if I want to specify a color,will you charge extra cost?
A: will not,but we will require MOQ500 pcs.
10. Q:ok,last question,Do you accept OEM?
A: Of course we can,we have own die-casting machine and mould design team,must be able to meet your requirements,and we already have a lot of OEM customers.

Electrical

· Standard AC input of 90-305V,up to 480v available

· EMI filter: 47CFR, part 2, part 15

· Power factor: >0.9

· Total harmonic distortion: <20%

· Surge protection: IEC/EN 61000-4-5 EMC test standard

· Licensed electrician required for installation

Housing

· Rugged, fully sealed, die-cast aluminum housing

· UV-resistant, multi-layer, architectural color, powder coat finish

· High impact, heat resistant, tempered lens

Energy Control Options

· Motion detection available

· Photo sensors available