Model | JSPP-60-12 | JSPP-60-24 | JSPP-60-36 | |
Output | Dc Voltage | 12V | 24V | 36V |
Rated Current | 5.0A | 2.5A | 1.66A | |
Current Range | 0~5A | 0~2.5A | 0~1.66A | |
Rated Power | 60W | 60W | 60W | |
Ripple&Noise(Max) | 150mV | 150mV | 150mV | |
Voltage Tolerance | ±4% | ±4% | ±4% | |
Setup,Rise Time | 100ms/220VAC | |||
Hold Up Time(Typ.) | 80ms/220VAC | |||
Input | Voltage Range | 100~265VAC | ||
Frequency Range | 47~60Hz | |||
Power Factor(Typ) | PF>0.6/220VAC | |||
Efficiency(Typ) | 82% | 84% | | |
Short Circuit | Protection type:recovers automatically after fault conditions is removed | |||
Overlaod | Overload protection@145~160%above peak rating | |||
| Over Temperature | protection typer:shut down o/p voltage.re-power on to recover | ||
Environment | Working Temp | =C34=B32 | ||
Working Humidity | 20~90%RH no-condensing (Waterproof) | |||
Storage Temp Humidity | -40~ +60℃,10~90%RH | |||
Safety&Emc | Safety Standards | CE Mark(LVD),IP68 | ||
Withstand Voltage | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | |||
NOTE | 1.All parameters NOT specially mentioned are measured at 220VAC input,rated laod and 25℃ of ambient temperature. | |||
2.Ripple&noise are measured at 20MHz of bandwidth by using a12''twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | ||||
3.Tolerance:includes set up tolerance,line regulation and load regulation. | ||||
2.Ripple&noise are measured at 20MHz of bandwidth by using a12''twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor. | ||||
3.Tolerance:includes set up tolerance,line regulation and load regulation. |
Others | Dimension | 150*40*30(mm)(L*W*H) |
Carton Quantity | 50PCS/Carton | |
Carton Size | 450*275*190 | |
Weight | 17kg/pcs |
Production Process