Auto Recovery 36W 24V LED Strip Light Power Supply IP33 Waterproof
Led Tape Light Power Supply SAA Certified 36W 24V For Led Signs
Specification details:
Model | JSP-24036 |
Rated load power | 36W |
Output Voltage | 24V |
Output Current | 1.5A |
Input Voltage range | 100-240V |
Withstand | 2000V |
PFC | >0.7 |
Dimmable | No |
Dimension(mm) | L140xW45xH28mm |
Efficiency | 86% |
Frequency | 50/60HZ |
Ripple | 300mV Max |
Electronic wire request | Teminal blocks |
Over loading protection | 115%-125% hiccup mode, auto-recovery |
Over heat protection | <85°C hiccup mode, auto-recovery |
Over voltage protection | 115%-125% hiccup mode, auto-recovery |
Setup, rise, hold up time | 200ms, 100ms, 20ms |
Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC |
Working temperature and humidity | -10℃~+60℃(Refer to output load derating curve),indoor or dry |
Store temperature and humidity | -20℃~+85℃, and dry condition |
Certification | SAA CE ROHS |
Warranty | 3 years |
Input plug available | AUS PLUG, EU PLUG, US PLUG |
1. If without specia explanation, all specifications are measured at an input of 220VAC, rated
load, ambient temperature of 25 ° C .
2. Ripple & Noise Measurement Method: Use a 12 '' twisted pair, and the terminals are
connected in parallel with 0.1uF and 47uF capacitors and tested at 20MHz bandwidth.
FAQ:
Q1. Can I have a sample order for products?
A: Sure, we welcome sample order to test and check quality. Mixed samples also acceptable.