81% Efficiency LED Switching Power Supply
24v 2.5a 60w slim power switch AC110 220v constant voltage for ultra thin led sign adertising board
60W 24 V DC Transformer LED Power Driver 2.5A Regulated LED Module Strip Light Switch Mode Power Supply
Product No. | JSPS-60-12 | JSPS-60-24 | |
Output | DC voltage | 12V | 24V |
Rated Current | 5A | 2.5A | |
Current Range | 0-5A | 0-2.5A | |
Rated Power | 60W | 60W | |
Ripple and Noise(Max)Note.2 | 150mVp-p | 240mVp-p | |
Voltage adjustment | 10.8-13.2V | 22-27.6V | |
Voltage Accuracy Note3 | ±1% | ±1% | |
Linear Adjustment Note4 | ±0.5% | ±0.5% | |
Load Adjustment Note5 | ±0.5% | ±0.5% | |
Start and rise time | 1000ms,30ms/230VAC 1000ms,30ms/110V | ||
Hold time(Typ) | 50ms/230VAC 10ms/115AC | ||
Input | Voltage range | 100-240VAC | |
Frequency range | 47-63HZ | ||
Efficiency(Typ) | 80% | 81% | |
AC current (Typ) | 0.57A/100V 0.23A/220V | ||
Surge current (Typ) | Cold Start:65A/230VAC | ||
Current leak | <2mA/240VAC | ||
Protection | Overload | Larger than 105% of capacity | |
restoration after abnormity removed | |||
Overvoltage | |||
Overheat | Overheat protection starts when temperature in transistor over 140℃ | ||
Automatic restoration when temperature is back normal | |||
Environment | Working temp. | -20~+60℃(Refer to the tenuation curve) | |
Working humidity | 20~90% RH, without condense | ||
Storage temp & hmdty | -40~+80℃ | ||
Temp. coefficient | ±0.03%/℃ (0~50℃) | ||
Vibration proof | 10~500HZ,5G 10min / cycle,X,Y,Z axes 60 min each | ||
Safety reg. & EMC (Note.6) | Safety regulation | GB195110.1-2004/IEC61347-1:2003 CE(EMC+LVD) | |
Voltage proof | I/P-O:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
insulation resistance | I/P-O/P:100M Ohms/500VDC/25℃/70% RH | ||
EMC irradiation | EN 55015:2006;EN61000-3-2:1995+A2:2005 | ||
EMC disturbance proof | EN 61000-3-2:2006; | ||
Packing Details | Dimensions | 130*50*31mm(L*W*H) | |
Packing | 0.109kg/PCS;100PCS/21.9kg | ||
Notes: | 1. Unless specially indicated, all data are taken under 230VAC input, rated load and 25℃ environment temp. | ||
2.Ripple and noise: measured with a 12” double ripple cord connected in parallel with a 0.1μF and a 47 μF capacitor on 20MHz bandwidth. | |||
3.Accuracy: including preset errors, linear adjustment rate and load adjustment rate. | |||
4.Linear adjustment: taken under rated load from low voltage to high voltage. | |||
5.Load adjustment: taken under 0~100% of rated load. | |||
6. Power supply is taken as part of the whole system, and needs to be confirmed with terminal instruments for EMC. |
Packing:
White/brown or customized color box +Carton(double wall corrugated board); Wood case if necenarry.
Shipping:
1. FedEx / DHL / UPS / TNT for samples, Door-to-Door;
2. By Air freight or by Sea for large quantity, for FCL; Airport/ Port receiving;
3. Customers specifying freight forwarders or negotiable shipping methods!