Mass Production 48V50AH LiFePo4 Battery With Communication BMS For Telecom Tower
48V 50Ah 2.5KWh LiFePo4 Battery Specification
No. | Item | General Parameter |
1 | Model | HX4850T |
2 | Standard Capacity | 50AH |
3 | Rated Voltage | 51.2V |
4 | Max Charge Voltage | 58.4V |
5 | Discharge Cut Off Voltage | 40V |
6 | Standard Charge Current | 50A |
7 | Max Continuous Discharge Current | 50A |
8 | Peak Instant Discharge Current | 60A |
9 | Dimension(ABS) | 482.6*455*132mm |
10 | Total weight(Approx.) | 28kg |
11 | Operate Temperature | -20°C~60°C |
12 | Built-in BMS | YES |
13 | Cycle Times | 2000 cycles |
BMS Basic specification:
Item | Content | Criterion |
Charge and Discharge Port | Shared | |
Communication | RS232/RS485 | |
Parallel Connection | 15PCS | |
Serial Connection | Not allowed | |
Normal Current | Charge Current | ≤50A |
Discharge Current | ≤50A | |
Over charge Protection | Over charge detection voltage | 3.75±0.05V |
Over charge detection delay time | ~1000mS | |
Over charge release voltage | 3.55±0.05V | |
Over charge release condition | Cut off charger | |
Maximum charge voltage | 3.65±0.05V | |
Over discharge protection | Over discharge detection voltage | 2.20V±0.10V |
Over discharge detection delay time | 200ms | |
Over discharge release voltage | 2.4V±0.10V | |
Discharge over current protection | Discharge over current detection current | 100A |
Discharge over current detection delay time | ~100±50ms | |
Discharge over current release condition | Cut load | |
Short circuit protection | YES |
Inner Cell performances:
Paralles connection
Production line:
3GWH production line Mass production
Battery packaging:
Cell production line