The length of the telescope can handle changes during installation
Allows you to order a length component and "adjust" the length accordingly to compensate for the difference in the slab. The two-piece component is compressed to accommodate the inventory in the building's elevator, which can then be expanded (retracted) to the required length at the installation point.
Found in:
Unlike traditional steel bolts, the steel bolts can be cut to a certain length according to different site conditions, allowing you to order a length component and "adjust" the length accordingly to compensate for the difference in the slab. The stud and track system consists of traditional frame members and adjustable interlocking components. The adjustable part allows extended length adjustment and can adapt to changes in slabs, smaller wall heights of each floor, etc. The interlocking assembly of bolts and tracks eliminates the need for most connections!
The elevator stud bolt member arrives at the compressed position to accommodate the inventory in the building elevator, and then it can be expanded (retracted) to the required length at the installation point. This reduces the cost of placing long studs on the floor that can only be accessed by elevators and stairs.

track
The track has two unique functions. The most obvious track
All materials: G40 (G60 can be provided as a special order)
The feature is that the V-groove rolls into the flange of the track to match the swaged end of the stud. Next, the dent is pressed into the center of the fiber web. Together, the V-shaped grooves and dimples provide a reliable connection between the stud and the track, without the need for mechanical fasteners.
The standard length of the track is 10'0". For non-standard conditions, a shorter length can be used.
Not all products are available in all markets. Please check with your local sales representative for availability in your area.

Features and advantages
Another additional benefit of the system is that it does not require bolts to fix bolts and guide rails. The patented swaged end structure in the stud is combined with the swaged structure of the track, so that the two components can be "interlocked" without screw connection. The knurling along the track web allows for minor adjustments while firmly locking the components in place.

Twisted and locked in place. Studs can be installed from the ground, which greatly reduces the time to climb ladders and scaffolding.

• The installation has been certified, no fasteners are required to fix the studs to the top or bottom rails. Compared with traditional columns and crawler frames, productivity can be significantly improved. This can save a lot of installation costs!
• Safer viewfinder system™ reduces on-site hazards. It takes less time to climb scaffolds, ladders, lifts and bend over to install screws, thereby reducing work-related injuries and reducing workers’ compensation costs.
• Reducing the cutting of studs can greatly reduce the waste and waste of materials.
• Reduce noise, reduce steel shavings and improve air quality.
• Allows vertical inter-storey deflection in seismic loads and live loads in studs (instead of tracks). This feature eliminates the need for deflection tracks in the firewall head assembly