Chint BH-0.66 Current Transformer 100/5 to 4000/5 for Low Voltage Distribution Panel Power Measurement IEC60044-1
General
These current transformers are a comprehensive offer, ideally suited for use throughout entire low voltage field, from 40A to 4000A. They deliver at the secondary a current (0-5 A) proportional to the current measured at the primary; they can be used in combination with measurement devices (switchboard instrumentation, kilowatt-hour meters, power-monitoring units, etc.)
Primary current can be measured in two ways:
CT with let-through primary
CT with connection of primary by screw and nut
range | BH-0.66 |
---|---|
product name | CT |
product or component type | Current transformer |
secondary current | 5 A |
accuracy class | Class 0.5 at 8 VA |
[In] rated current | 300 A |
current transformer type | Tropicalised for busbar and cable |
---|---|
current transformer ratio | 300/5 |
[Ith] conventional free air thermal current | 18 kA |
dynamic withstand current | 2.5 Ith |
maximum safety factor | 5 |
[Ue] rated operational voltage | < 720 V AC 50/60 Hz |
[Ui] rated insulation voltage | 3 kV |
mounting mode | Insulated locking screw |
mounting support | DIN rail |
width | 56 mm outside: |
height | 80 mm outside: |
depth | 43 mm frame: |
diameter | 27 mm |
net weight | 0.303 kg |
[Uimp] rated impulse withstand voltage | 3 kV |
electrical insulation class | Class B |
cable outer diameter | 27 mm |
opening of bars | 32.5 x 10.5 |
sealing | Without |
standards | VDE 0414 |
---|---|
product certifications | CE |
IP degree of protection | IP20 |
relative humidity | 0…95 % |
ambient air temperature for operation | -25…60 °C |