Flexible grounding body HD-R10Y is mainly used in grounding network buried resistance reduction; the original metal grounding body corrosion effect is relatively poor, in addition is not suitable for mountainous areas, especially rocky areas to use,
Construction of flexible grounding body
(5) Open the two external bags of raw materials and add them to the liquid and stir well, and take them to the edge of the ditch, or the pit, to be used.
(6) As vertical pouring can be poured directly.
(7) If you do horizontal pouring, you need to keep stirring slowly until the resistance of the liquid in the barrel increases and becomes sticky like porridge, then pour it into the trench to wrap the horizontal grounding body and form a long line of pouring while pouring.
(8) wait for its solidification to form with elastic grounding conductor, at this time will no longer dissolve in water, can be backfilled, the construction of flexible Hunan Hertz-Ohm Engineering Group Co., Ltd. 4 grounding body thus ended
(9) Backfill the grounding trench, and clean up the site garbage, measure the qualified can record the results and then leave the site. Flexible grounding body horizontal laying diagram: Hunan Hertz-Ohm Engineering Group Co., Ltd. 5 Scope of application Use is not limited by environmental conditions,suitable for all areas requiring resistance reduction.
Hunan Hertz-Ohm Engineering Group Co., Ltd. 6 Technical parameters table Name Type Resistivity (Ω) Shock test (rate of change) Work frequency test (rate of change) Corrosion test galvanized flat iron Resistance reduction effect Coefficient Retardation factor Flexible grounding body test results HD-R10Y 1.38 0.70% 2.60% 0.0022 0.16 0.833 Standard requirements HD-R10Y 5 20% 20% 0.03 0.7-0.8 0.8-0.9
The use is not restricted by environmental conditions, as long as the construction can be received according to the amount of resistance reduction effect, long service life, resistance reduction effect is stable. A remarkable feature of flexible grounding body HD-R10Y is that it can be formed in irregular shape and the effective contact area formed between it and the medium, so as to obtain a very good resistance reduction effect. This is what no grounding pole and grounding module can do in the past.