New Trend Universal EPP10MS8 lightning-proof plugs and sockets
Overview
Description
EPPJ10MS-8 rack-mounted power supply lightning protection socket is designed for standard rack-mounted power supply socket with surge protection unit installed on the standard cabinet.
It is mainly used for fine lightning protection of communication equipment, monitoring terminals and other important small power distribution equipment in cabinets to avoid damage to equipment due to overvoltage and lightning induction. Use places such as: computer networks, precision equipment, small computer rooms, bank savings offices, offices, monitoring rooms and various types of power equipment power protection; equipped with multiple multi-purpose output jacks, and equipped with failure indication.
The use of precision protection circuit, core components selected from international ****, stable performance.
Large through-current capacity, low port clamping voltage and sensitive response.
Easy installation, no special maintenance, long service life.
Aging thermal decoupling and short-circuit overcurrent decoupling, indicator visual warning.
Technical parameters
Model
EPPJ10MS-8
Rated working voltage Un
220VAC
Rated working current
16A
**** Continuous working voltage Uc
275VAC
Nominal discharge current In(8/20μs)
3kA
**Maximum discharge current Imax(8/20μs)
6.5kA
Voltage protection level rise [L-PE/N-PE/]
1.0kV/1.0kV
Enclosure material
Black aluminum alloy and flame retardant plastic
Dimension specification
440mm×65mm×45mm
Functional features
Independent jack introduction structure, flame retardant and insulated
Working environment conditions
Temperature range: -40℃~+70℃ Humidity range. 30%~85% (25℃)
275V |
Connection method
1,When using, plug directly into the wall socket or other power output jack.
2,Please make sure the PE terminal of the plugged socket is reliably grounded, or the rack itself is reliably grounded (the socket shell is connected to the internal PE terminal).
Caution
1,The rated load current of lightning protection socket is 16A.
2,The grounding wire of the machine room or independent equipment room should be as thick and short as possible, and the grounding resistance should be less than 4Ω.