Customized Protective Lightning Repeller Q235 Steel For Broadcast
Device structure and working principle
1. Device structure PLR includes thundercloud charge gathering and elimination unit, strong ionization discharge unit and grounding body, the structure schematic diagram is shown in Figure 1 a ) The lightning-resistant array pin bar is a thundercloud charge gathering and elimination unit, fixed outside of a thousand pin holders. Hunan Hertz-Ohm Engineering Group Co., Ltd. b ) One pole of the strong ionization discharge electrode is compounded with the thundercloud charge gathering and elimination unit, and the other pole is connected to the grounding conductor. c ) The grounding electrode is fixed to the mounting position by means of a flange and grounded by means of a ground wire connected to the flange holder. Working Principle The working mechanism of PLR plasma lightning resistance is shown in Figure
2. PLR use of higher than the protected target of the array of lightning resistant needle like tip effect, so that its own in the lightning electric field.Induced electric field strength is tens of times higher than the protected target and attracts thundercloud electric field, electric, charge so that the protected target is in a relatively low electric field safety position, and the use of induction array anti-thunder needle and media blocking strong ionization compound discharge