Two Tanks LS-7202F 135 Liter household ultrasonic cleaner With Oil Filteration System

Limplus ultrasonic cleaner working theory:

Ultrasonic cleaning baths for cleaning engine parts such as cylinder heads, engine blocks, etc. in garage- and overhaul companies.

Removing oil, grease and carbon contamination is essential for a quality revision. Not only the sight surfaces but also the oil and cooling channels are thoroughly cleaned.

The ultrasonic cleaning system depicted here with lift is specially developed for the cleaning of cylinder heads of both passenger cars, trucks, buses and agricultural vehicles.

The dimensions of the elevator plateau, with oscillation to increase the rinse operation in the channels, be such that the larger cylinder heads also fit on it. The hinged cover is an integral part with the elevator which means the elevator in the upper stand, lid open and at the bottom stand cover closed.

Limplus Benefits:

Gently moves parts to assist with cleaning

Remove all components for next operation

Reduces/replaces hazardous cleaning solvents

Micro-clean parts reduces part failures

Lower labor costs - Increased profits

Remove all contaminants without damage the parts/instruments.

Specifications of LS-7202F:

Ultrasonic cleaning tank (mm): 600X500X450(L*W*H)

Rinsing tank size (mm): 600X500X450(L*W*H)

Tank total capacity: 135L / Tank

Tank material: SUS304 / SUS316L

In-tank surface finishing: Hard-Cr Plating Treatment ( 20+ microns )

Housing material: Stainless steel

Ultrasonic frequency: 28kHz / 40kHz

Ultrasonic transducer: 72pcs

Ultrasonic output power (MAX.): 3600W

Electronic generator: LSG1800

Heater (hot plate) power: 9KW

Timer: 0~999minutes

Temperature: 20~95C

With Oil filtration system

With oil catch can

Power supply: AC220V / AC380V / AC415V, 3phase

Details of part Limplus ultrasonic cleaner: