UGR<19 Indirect Led Linear Light Trunking System with Daylight Sensor
DESCRIPTION
Coreshine U-LINE Indirect Led Linear Lighting System is a new innovation solution for creating beautiful and efficient lighting.
- Unique design
- Tools Free Installation
- 10% of the light upward and 90% reflected onto the floor
- Delivering up to 150 lm/w
- Low UGR <19. Perfect for school, library, classroom, shops, industry, commercial and hospitality
- more profitability and productivity.
DETAILS
U-Line with Multi-sensor
The Multi-sensor system combines energy-saving with high convenience for users. Most energy can be saved by integrating motion and daylight sensors into the trunking. It can swivel and help to detect the area accurately. It ensures a sufficient level of brightness in specific areas under a defined period of time.
Group control sensor or broadcast control sensor
Coreshine Daylight Sensor:
Daylight mode operation only.
By detecting the light level, our led linear system can be self-adjustable the brightness via the Daylight sensor, then it reaches the purpose of saving energy and cost.

Coreshine Motion Sensor:
Motion mode operation only.
On this mode, it can detect the long-distance motion of humans via motion sensors.
| H:8m | H:15m |
 | Lamp installation height>=3m L1:2.5mm L2:2m Lamp installation height<=3m if it's 3m L1=tan40°*H*2 L1=5M L1=tan20°*H*2 L1=2.1M | Lamp installation height>=6m L1:1mm L2:1m Lamp installation height<=6m if it's 6m L1=tan40°*H*2 L1=10M L1=tan20°*H*2 L1=4.3M |
H means installation height
L1 means the horizontal detection distance on ground when the horizontal angle is 80°
L2 means the vertical detection distance on the ground when the vertical angle is 40°
tan40° =0.84 tan20° =0.36
When the installation environment is wide space without any Occlusion of objects, sensor detection distance can be increased by 20%.
When the installation environment around the metal, such as metal shelves, the sensor detection distance will be decreases.
Coreshine Motion + Daylight:
This mode combines the motion sensor and daylight sensor for light dimming control. It can automatically adjust the lighting to reach the defined brightness, then remains at a lower brightness level during the stand-by time, if there is no any object be detected again after the stand-by time, the lamp will automatically be switched off. This mode can be widely applied in such as office, factory, or warehouse. It can save energy largely without any manual control.

Setting:
Sensitivity
Detection area can be adjusted by selecting the combination on the DIP switches to fit precisely each application.
Please noted, there will be possible to make misinformation on object detection while with setting as 100% sensitivity.
Hold time
Refers to the time period the lamp remains at 100% illumination after motion object leaves the detection area.
Stand-by time
Refers to the time period the lamp remains at defined lower brightness level before it completely switches off in long absence people. When set to 0s, lamp will directly switches off after the hold time. When set to +∞ the lower light is maintained until motion is detected again.

The main advantage of our microwave sensor is the long-distance detection. Comparing with Other brands, CoreShine microwave sensor can detect signal from up to 8m distance. And we will install several pieces microwave on the led linear. Our microwave sensor have the following main advantages:
Motion sensor
- 330 ° rotation, with small angle while long distance,detect the motion from the target location.
- High resistance to the temperature variation.
- Except the horizontal and vertical angle, Microwave sensor also support the horizontal rotation ( 330°) and vertical rotation ( 60°)

Length | Detection | Code No. |
600mm | 8m detection | CUM-0608-X1WH-X2 |
15m detection | CUM-0615-X1WH-X2 |
1200mm | 8m detection | CUM-1208-X1WH-X2 |
15m detection | CUM-1215-X1WH-X2 |