wire stripping cutting twisting and tinning machine automatic wire processing machine
Equipment Configuration
With the German high pixel image detection system
Industrialrobot(EPSON), Module(THK), Electric(YASKAWA), Cylinder(SMC), Sensor(Omron), CCD Camera(Germany Basler),
Reducer(xinbao)
Equipment Function
1. Double camera shot visual inspetion
2. Discharge the defective and without crimping at A end
3. Pressure detection function at both A and B end
4. Discharge the defective ones and then fool-proof clipping
5. Adjust the crimping height on touchscreen
6. High speed, the maximum can reach 3200pcs/H
Technical Parmeters
Mechine Function | Wire measuring cutting, Two ends(half striping, striping, pressing), Stripping length, Penetraction depth crimping sinking buffer structure, Terminal vertical delivery device pre-striping the whole line function |
Capacity | Both-end crimping 3200pcs/H |
Drive Mode | Mitsubishi SERVO Drive, IPC |
Wire Size | AWG30-AWG14 |
Mould Assembly Type | Assemble AS40, AS42, AE30( Customized Acceptable) |
Wire Cutting Length | 30-9999mm |
Cutting Precision | ±0.5mm |
Stripping Length | 1.0-15.0mm |
Penetraction Depth | MAX 3mm |
Crimping Capacity | 2 TON servo motor two sets mute specifications |
Detection Device | Air pressure decline, Wire exists or not, Wire overload, Terminal exists or not, Terminal overload, Stripping images detection, Terminal images detection, Pressure detection |
Power Source | Single-phase/220V/50Hz |
Power | 3KW |
Compressed Air | 0.5Mpa about 140NL/Min |
Equipment Size | L1510*W980*H1780mm |
Weight | 600KG |