linture is not liable for any personal injury or property damage resulting from the use of this equipment. It is
buyer's responsibility as to the safe handling & operation of this equipment and to verify equipment is
compliance to their machinery.
Description of performance parameters of Mitsubishi servo motors (mr-je series servo motors hf-kn23j-s100, hf-kn23bj-s100):
Hf-kn series (low inertia, small capacity) specification:
Power supply capacity *1[kva]: 0.5
Rated output [w]: 200
Rated torque *3[n · m]: 0.64
Maximum torque [n · m]: 1.9
Rated speed [r/min]: 300
Maximum speed [r/min]: 4500
Instantaneous allowable speed [r/min]: 5175
Power change rate at continuous rated torque [kw/s]:
Standard: 16.9
With electromagnetic brake: 13.1
Freeze current [a]: 1.3
Maximum current [a]: 3.9
Regenerative brake frequency *2*3[return / minute]: remarks *4
Inertia ratio j [10-4 kg.m2]:
Standard: 0.24
With electromagnetic brake: 0.31
Recommended load inertia ratio *1:10 times or less
Speed and position encoder: incremental 17bit encoder
Oil seal: Yes
Heat resistance grade: 130 (b)
Structure: fully closed self cooling (protection grade: IP65) *2
Environmental conditions *4:
Ambient temperature: 0~40 ℃ (no condensation) storage: -15~70 ℃ (no condensation)
Ambient humidity: below 80% RH (no condensation) storage: below 90% RH (no condensation)
Vibration: x:49m/s2 y:49m/s2
Vibration level: V10 *7
Allowable load of shaft *6:
L[mm]: 30
Radial [n]: 245
Thrust [n]: 98
Weight kg:
Standard: 1.2
With electromagnetic brake: 1.6