Solar Panel Frame Aluminum Profile Aluminum Solar Panel Border LP031

The frame on the photovoltaic panel is generally called solar frame, and the material of the solar frame is mostly aluminum alloy, for the following reasons:

1. Aluminum alloy profiles are extruded profiles, which can make complex sections and facilitate the installation of corner codes, which is difficult for stainless steel materials;

2. The aluminum alloy has low density and light weight, but its hardness and tensile strength can meet the requirements of bearing the battery panel. The steel is relatively heavy, and the weight of photovoltaic glass is already heavy. If the solar frame is also heavy, it will greatly increase the cost of handling and installation.

3. Aluminum alloy is corrosion-resistant. Aluminum alloy itself is a corrosion-resistant metal. In addition, the surface of solar frame will be anodized, which can effectively block the contact between air and aluminum alloy matrix and reduce the risk of oxidation. The service life of solar aluminum frame can reach more than 25 years. Although some high-strength plastics are also very light, their oxidation resistance is poor and their service life is not guaranteed.

Since establishment, Lipu Metal has always had a production line dedicated to the R&D and production of photovoltaic frames. At present, it supplies not only Lipu Energy, but also other Tier 1 panel factories. If you have any need for photovoltaic frame, please contact us for negotiation.

Technical Data

About shipping

About LP Solar
• Lipu Metal (Jiangyin) Co., Ltd was previously called Leapton Metal (Suzhou) Co., Ltd before;
• November 30th, 2018, Lipu Metal (Jiangyin) established, the factory was relocated from Suzhou to Jiangyin;
• The new factory covers an area of about 21,300 square meters;
• The annual capacity of 500MW for mounting system and 500MW for aluminum frames;
• Lipu Metal has obtained 17 product patents so far.

About Factory

Raw material area	Material area	Cutting area	Producting area	Sampling area
Pre-install area	Wahouse 1	Packing area	Finish W.H. 2	Loading area