20" PP jumbo big fat melt blown sediment water filter cartridge
filter cartridge 10 20 inch PP Melt Blown Sediment filter | |||
Filter Micron Rating | 0.5, 1, 5, 10, 20, 30, 50, 75, 100, 200 | ||
Filter Media | Polypropylene / PP | ||
Filter Lengths | 10 to 40 inch | ||
Filter Inner Diameters | 1 inch | ||
Filter Outer Diameters | 63.5mm (2.5 inch) | ||
Netting | LDPE | ||
End Caps | Polypropylene / PP | ||
Temperature Rating | Durable 40℉ to 145℉ range Durable 4.4℃ to 62.8℃ range |
10" big blue PP sediment water filter | |||
Temperature | <60℃ (PP) | ||
Flow Rate | 0.5 m2 / Hr, 10 Inch | ||
P(MAX) | 0.1 MPA Forward ; 0.06 MPA Backward | ||
pH | 1-13 | ||
Maximum recommended flow rate | 5 GPM per 10 inch length | ||
Maximum recommended differential pressure | 25 PSIG at ambient temperature 15 PSIG 140℉ (60℃) |
Features:
(1) High filtration precision, strict production process and unique fiber structure make the product quality stable and reliable.
(2) Large amount of filtration and small pressure loss The fiber is thermally bonded by itself and does not use a binder, so that the pressure loss is reduced and the filtration flow rate is increased.
(3) Long service life and low filtration cost The product structure is tight and loose, and the amount of dirt is large, which prolongs the service life of the filter element.
(4) Strong corrosion resistance and wide applicability
(5) The water treatment capacity is 30 tons, and it is recommended to replace it once every 7 months.