1 Micron Melt Blown Pp Filter Cartridge For Water Purification System
Features
1. 100% high purity polypropylene (melt blown), no adhesives
2. High dirt holding capacity and low pressure loss
3. Many connections(DOE, 226, 222 End caps)are available
4. Wide chemical compatibility, various micron ratings(1um to 100um)
5. One piece construction, up to 1524mm(60”)
Specification
Construction Materials | Filter Media | Melt Blown Polypropylene |
Inner core | PP or core less | |
Seal Method | Thermal Bonding, No Adhesives | |
O-rings/ Gaskets(only for 222,226,DOE) | Silicone/Nitrile/EPDM/Viton/Teflon | |
Technical Data | Normal Operating Temperature | <50℃ (122 oF) |
Max. Operating Temperature | <80℃ (176 oF) | |
Filtration efficiency | ≥ 80% | |
Sterilization | Not recommended | |
Size | Outer Diameter | 63.5mm±1mm |
Inner diameter | 30mm,28mm,25mm,20mm,16mm | |
Filtration area(m2) | 0.4 /10'' | |
Length | 5" 10" 20" 30" 40" or customized | |
pH | 1—13 |