58.4V 25A Marine lithium LiFePO4 Battery Charger IP65 Waterproof
58.4V 25A Marine and Waterproof LiFePO4 Battery Charger IP65 Waterproof High Efficiency
Brief introduction:
48V 25A output Marine Battery Charger.
IP65 / IP66 Waterproof Rate Rate.
Universal 90~264Vac input voltage with PFC.
50.4V / 54.6V / 58.4V customized max charging voltage for Lithium / lead-acid batteries.
Micro-processor controlled and intelligent 4 steps charging.
92% high efficiency.
2 years warranty, high quality.
Technical information:
Item No.: VL4825LWP
Dimension: 310*230*101 mm
Net weight: 8.0 KG
Input voltage: wide 90~264Vac
Output rated: 48V, 25A
Max charging: customized 50.4V, 54.6V, 58.4V
WaterProof rate: IP65 / IP66
Applied to battery Types: 48V Lithium Battery
Smart Charging: Auto. Pre-charge, CC, CV
Simple Guidelines when Buying a Charger
1. Choose the correct charger by battery chemistry like lead-acid, li-ion, LiFePO4 etc. Most chargers serve one chemistry only. Make sure that the battery voltage agrees with the charger. Do not charge if different. A lead acid battery charger does not suit for a lithium battery (Li-ion, LiFePO4, LiMnO2 etc.) and a lithium battery charger does not suit for a lead acid battery (AGM, GEL etc.).
2. The Ah (battery capacity) rating of a battery can be marginally different than specified. Charging a larger battery will take a bit longer than a smaller pack and vice versa. Do not charge if the Ah rating deviates too much (more than 25 percent).
3. A lead acid charger should have a float charge when fully saturated; a nickel-based charger must switch to trickle charge when full. Lithium battery cannot absorb overcharge and no need of trickle or floating charge. Trickle charge and float charges compensate for the losses incurred by self-discharge.
4. A high-wattage charger shortens the charge time but there are limitations as to how fast a battery can be charged. For lead acid battery, charging time often 8-12 hours. For lithium battery, charging time is often 3-4 hours. For example, if your lead acid battery 72V100Ah, then you need a 72V 8-12A lead acid battery charger. If your lithium battery is 48V100Ah, you need a 72V 25-30A lithium battery charger and max charging voltage will be customized to 78V or 84V or 87.6V for different chemistry, say Li-ion, LiFePO4, LiMnO2 etc.
Inside of marine battery charger:
Features:
◆ Advanced high frequency switching mode power supply technology.
◆ DC output isolated from AC input.
◆ Auto worldwide Input 110 / 240Vac(90 ~ 264Vac) with PFC, 50Hz ~ 60Hz.
◆ Charging parameters are insensitive to the AC input line voltage variations.
◆ Completely automatic battery charging: Pre - charging, CC, CV, Absorption, Float or Cut - off.
◆ 2 LEDs: LED1 Red (power on), LED2 Red/green (charging/full)..
◆ Possibility to customize charging curve for request.
◆ Protections: Short circuit, Over-voltage, Over-temperature, Reverse Polarity.
◆ Efficiency > 95%.
◆ Forced ventilation with fans.
◆ 100% full load burn-in test.
◆ Aluminum casing, light weight, portable, on-board.
1,500W waterproof charger Size: 310×230×101 mm Net weight: 6.0 KG | |||||||
Input | Model | Apply to battery types | Floating V | CV (V) | CC (A) | Switching | |
PFC AC Input: 90 - 264V
Frequency: 47~63HZ
| VL1280WPL | 12V LiFePO4 Battery | 14.6V | 80A | CC5~8% | ||
VL1280WP | 12V Lead-acid Battery | 13.5V | 14.7V | 80A | CC20% | ||
VL1480WP | 14V AGM Battery | 13.5V | 14.4V | 80A | CC20% | ||
VL1680WPL | 16V LiFePO4 Battery | 18.2V | 80A | CC5~8% | |||
VL2445WPLM | 24V Li-MnO2 Battery | 29.4V | 45A | CC5~8% | |||
VL2445L | 24V LiFePO4 Battery | 29.2V | 45A | CC5~8% | |||
VL2445 | 24V Lead-acid Battery | 27.6V | 29.4V | 45A | CC20% | ||
VL3630WPLM | 36V Li-MnO2 Battery | 42V | 30A | CC5~8% | |||
VL3630WPL | 36V LiFePO4 Battery | 43.8V | 30A | CC5~8% | |||
VL3630WP | 36V Lead-acid Battery | 41.4V | 44.1V | 30A | CC20% | ||
VL4825WPLM | 48V Li-MnO2 Battery | 54.6V | 25A | CC5~8% | |||
VL4825WPL | 48V LiFePO4 Battery | 43.8V | 25A | CC5~8% | |||
VL4825WP | 48V Lead-acid Battery | 55.2V | 58.8V | 25A | CC20% | ||
VL6020WPL | 60V LiFePO4 Battery | 73V | 20A | CC5~8% | |||
VL6020WP | 60V Lead-acid Battery | 67.5V | 73.5V | 20A | CC20% | ||
VL7215WPL | 72V LiFePO4 Battery | 87.6V | 15A | CC5~8% | |||
VL7215WP | 72V Lead-acid Battery | 81V | 88.2V | 15A | CC20% | ||
VL8413WPL | 84V LiFePO4 Battery | 102.2V | 13A | CC5~8% | |||
VL8413WP | 84V Lead-acid Battery | 94.5V | 102.9V | 13A | CC20% | ||
VL9612WPL | 96V LiFePO4 Battery | 116.8V | 12A | CC5~8% | |||
VL9612WP | 96V Lead-acid Battery | 108V | 117.6V | 12A | CC20% | ||
Note: customized input / output / plug type / connectors are available. |
Q. What charger should I choose?
A. It depends on the type of battery, the capacity of the battery, the application and how much you are prepared to spend. Just tell us your battery information, DANL battery charger engineer will recommend the most suitable charger for you or customized by your batteries and applications.
Q. Can I charge several batteries in parallel?
A. The charger has no problem whatsoever of charging or maintaining several batteries, as long as they are connected in parallel. The charger sees the parallel connected batteries as one large battery. The sum of the capacity has to be below the recommendation for your model. Please note that there could be a high current between batteries when they are connected together, i.e. use high quality wiring.
Q. Can you really connect and then forget about the charger?
A. That depends on your batteries state and charger’s type. Danl lead-acid battery chargers have maintenance mode(floating mode), charger charges with very small current at this mode, so you can forget about the charger but not exceed 24 hours. If your battery is lithium type and without BMS system, please don’t forget the charger.