8A 12v ithium Ion Battery Charger With Intelligent 4 Steps Charging
Smart 12V 8A Lithium Battery Charger, small aluminum with max 14.6V CC CV charging
Brief introduction:
Universal 90~264Vac input voltage.
12V 8A rated output Smart Battery Charger.
14.4V / 14.6 / 14.7V customized max charging voltage for LiFePO4, Li-ion batteries.
Aluminum Black or Silver color case.
Micro-processor controlled and intelligent 4 steps charging.
85% high efficiency.
2 years warranty, high quality.
Spcifications:
Item No.: VL1208L
Dimension: 155*90*50mm.
Gross weight: 0.9kg.
Input voltage: wide 90~264Vac.
Output rated: 12Vdc 8Amps.
Max charging: customized 14.4V / 14.6V / 14.7V
Applied to battery Types: 12V Lithium-ion, LiFePO4, LiMnO2 battery.
Smart Charging: Auto. CC, CV, Floating or Cut-off.
Output series: 180W Size: 155×90×50 mm Net weight: 1.0 KG | ||||||
Input | Model | Apply to battery types | Floating V | CV (V) | CC (A) | Switching |
AC Input: 85~264V
Frequency: 47~63HZ
| VL1208L | 12V LiFePO4 Battery | 14.6V | 8A | CC5~8% | |
VL1208 | 12V Lead-acid Battery | 13.5V | 14.7V | 8A | CC20% | |
VL2405LM | 24V Li-MnO2 Battery | 29.4V | 5A | CC5~8% | ||
VL2405 | 24V Lead-acid Battery | 27.6V | 29.4V | 5A | CC20% | |
VL3604L | 36V Li-MnO2 Battery | 42V | 4A | CC5~8% | ||
VL3604 | 36V Lead-acid Battery | 41.4V | 44.1V | 4A | CC20% | |
VL4803LM | 48V Li-MnO2 Battery | 54.6V | 3A | CC5~8% | ||
VL4803 | 48V Lead-acid Battery | 55.2V | 58.8V | 3A | CC20% | |
Note: customized input / output / plug type / connectors are available. |
Application of LiFePO4 Battery Packs
⇒ UPS, Solar, Wind, Mobile generator, Back up power
⇒ Solar power bank, Solar LED lighting, Solar street light
⇒ Scooter, E-bike, Golf cart, E-motor, E-tour car, tricycle
⇒ Electric drill, electric saw, lawn mower and so on
⇒ Remote control cars, boat, aircraft, toys
⇒ Medical devices, equipment and portable equipment
⇒ Bluetooth, GPS, Wearable device, Power supply, Wireless
Factory Pictures:
Q. What charger should I choose?
A. It depends on the type of battery, the capacity of the battery, the application and how much you are prepared to spend. Just tell us your battery information, DANL battery charger engineer will recommend the most suitable charger for you or customized by your batteries and applications.
Q. Can I charge several batteries in parallel?
A. The charger has no problem whatsoever of charging or maintaining several batteries, as long as they are connected in parallel. The charger sees the parallel connected batteries as one large battery. The sum of the capacity has to be below the recommendation for your model. Please note that there could be a high current between batteries when they are connected together, i.e. use high quality wiring.
Q. Can you really connect and then forget about the charger?
A. That depends on your batteries state and charger’s type. Danl lead-acid battery chargers have maintenance mode(floating mode), charger charges with very small current at this mode, so you can forget about the charger but not exceed 24 hours. If your battery is lithium type and without BMS system, please don’t forget the charger.