48V 150Ah Lithium LiFePO4 Golf Cart Battery Built-in BMS Easy Installation 6000+ Deep Cycles CE, UN 38.3, UL,IEC

Quick Detail:

1. 51.2V 150Ah and 51.2V 105Ah golf cart EV battery model are optional.
2. Safest Lithium Iron Phosphate battery, CE MSDS UN38.3 approved, built-in BMS.
3. More than 4000 times and expected lifespan for 10 years.
4. High constant discharge current with 200A and max. pulse current up to 400A(35S).
5. Deep cycle, no memory effect, highly efficient.
6. Less thn 3% self-discharge rate per month.
7. With bluetooth function to check the battery status convenientl

Description:

Why Our Battery Is Better!

There are many choices Of Lithium Ion Batteries On The Market Today (Fewer Choices In Canada Than The USA) Our Battery Is Better Than Most Of These Options For The Following Reasons:

A SIngle 48 Volt Battery Solution – No Need To Buy Multiple 12 Volt Batteries And Connect Them In Series To Reach 48 Volts

• Series Connected Batteries Will Get Out Balance Over Time, Leading To Reduced Service Life And Possibly A Voided Warranty As It Is The Clients Responsibility To Ensure Series Connected Batteries Are Properly Balanced.

• Other Batteries That Are 48 Volts Are Much Lower Capacity, Resulting In The Need To Buy Multiple Battery Modules To Connect In Parallel

• No Need To Modify The Battery Tray And You Use The Original Hold Downs To Secure The Battery

Specifications:

Notices:

- During the pass-through charging, the blue charge light will not flash when output wattage is greater than the input voltage.

- Please remove the protective film on the screen before using it for the first time.

- The USB-C ports support plug and charge.

-The power station supports pass-through charging while connected via a vehicle output or AC outlet.

- Incompatible with appliances that require more than 300W input such as microwave, electric grill, refrigerator, electric vehicle, air compressor and more.

- If you feel that the battery drains fast when used for the first time, it is because the display information of the remaining power is inaccurate when the product is activated for the first time. The power remaining will automatically calibrate by discharging the battery to 1% and then recharging it to 100%.

- Use any 12V-26V solar panel to charge the power station.

Applications: