Light Weight 12V 8AH LiFePO4 Battery 2000+ Cycles Low Self-Discharge

Light Weight 12V8AH LiFePO4 Battery 2000+ Cycles Low Self-Discharge Solar Power

Quick Detail:

Capacity for assembled cell discharging by 0.2C:＞12AH

Battery Voltage:12.4A

Standard discharging method:0.2C constant current discharge to 8V

Maximum charge current:21A/60A-1s

Maximum discharge current:Assemblage Impedance ≤150mΩ

Internal Impedance:0~45℃ 60±25%R.H.

Operation Temperature and relative humidity Range:-5~60℃ 60±25%R.H.

Description:

The 12V 8Ah LiFePO4 battery can be safe used in many areas: power wheel, lawn mower, golf cart,

UPS backup system, lighting, motorhome, kid scooters, toy cars, disinfection sprayers, outdoor radio,

camping activities, musical instrument, fish finder, Kayak, backup power, radio, cellular remote camera

and more. A good replacement for SLA batteries

12V lithium battery can provide more than 2000 cycles and 10 years lifetime. The service life is more than

5 to 8 times that of other batteries. The 12V lithium iron phosphate battery adopts Automotive Grade LiFePO4

cells with higher energy density and more stable performance and greater power, maintain the capacity with

low self-discharge rate (less than 100μA). It’s very suitable for RV camper, fish finder, power wheel, lawn mower

Non-toxic, renewable energy, harmless to the environment. Robust ABS casing provides excellent impact

resistance and toughness. The built-in BMS (Battery Management System) can handle battery balance,

low and high voltage cut-off and short circuit protection, effectively protecting the lithium-ion cells from

being damaged by overcharging or over-discharging, extending battery life

Specifications:

Notices:

If you have multiple lossigy batteries and want to connect them in series into a 24V, 36V or 48V system,

please carry out the following 2 steps before connecting:

1. Fully charge each battery separately, then stand for 2 hours and check their voltage.

2. Connect all batteries in parallel and continue charging (if there is a large difference in the voltage of

one of the batteries, discharge it at least 80% and then fully charge it again). Do not connect them in series

until their voltages are equal.

If you don't balance them successfully the first time, please repeat it again.

In addition, you don't have to worry about the balance of cells inside the battery, because BMS will help

you solve it.

Applications: