12V 24Ah 307.2Wh Lithium LiFePO4 Deep Cycle Battery 2000+ Cycles PSE UL FCC

12V 24Ah 307.2Wh Lithium LiFePO4 Deep Cycle Battery 2000+ Cycles Rechargeable

Quick Detail:

Capacity for assembled cell discharging by 0.2C:＞12AH

Battery Voltage:12.4A

Standard discharging method:0.2C constant current discharge to 8V

Maximum charge current:21A/60A-1s

Maximum discharge current:Assemblage Impedance ≤150mΩ

Internal Impedance:0~45℃ 60±25%R.H.

Operation Temperature and relative humidity Range:-5~60℃ 60±25%R.H.

Description:

Lithium iron phosphate battery has high energy density, Long cycle life, Good safety performance,

No memory effect, etc. NERMAK LiFePO4 battery has built-in BMS protection to prevent overcharge,

Over-discharge, Over-current and short circuit, and excessive low self-discharge rate ensuring up to

1-year maintenance-free storage.

2000+ cycles of lithium-ion batteries are no problem, while traditional lead-acid batteries only have

500 cycles. The battery does not contain acid, which is safer and more environmentally friendly than

lead-acid batteries. Our lithium iron phosphate battery weighs only 7.1 pounds, which is only 1/3 of

the weight of a lead-acid battery.

Specifications:

Notices:

If you have multiple lossigy batteries and want to connect them in series into a 24V, 36V or 48V system,

please carry out the following 2 steps before connecting:

1. Fully charge each battery separately, then stand for 2 hours and check their voltage.

2. Connect all batteries in parallel and continue charging (if there is a large difference in the voltage of

one of the batteries, discharge it at least 80% and then fully charge it again). Do not connect them in series

until their voltages are equal.

If you don't balance them successfully the first time, please repeat it again.

In addition, you don't have to worry about the balance of cells inside the battery, because BMS will help

you solve it.

Applications: