48V 100Ah Lithium Battery Lead Acid Replacement High Performance for EV
48V 100Ah Lithium Battery Lead Acid Replacement High Performance for EV
Quick Detail:
LiFePO4 Battery
Maintenance Free & No Leakage
Extended Service Lifetime
Longer Shelf Life
Excellent Deep Discharge Recovery
Install Them Anywhere
Certification CE, FCC, PSE, UN38.3, MSDS, sea and air transport report
Description:
Provides safe, well-designed and high-performance standard LFP battery pack for customers. The battery
pack is compact, easy to install, free of maintenance and is used as the building block of energy storage
system by assembling in parallel. It is widely applied in home applications, small C&I ESS as well as
Telecom stations.
Specifications:
Batterypack | No. | Item | General Parameter | Remark | |
1 | Combination type | I6SIP | |||
2 | Total energy | 5120Wh | 5.12/kWh | ||
3 | Cycle life | 6000 次 | |||
4 | Rated capacity | Nominal capacity | 100 Ah | Standard discharge after charge (fbr battery pack) | |
Minimum Capacity | 100 Ah | ||||
5 | Rated voltage | 512 V | Wordking voltage | ||
6 | Discharge cut-off voltage | 40V | Discharge cut-off voltage | ||
7 | Charging voltage | 58.4V | maximum battery voltage | ||
8 | Internal resistance | W60m Q (the value will be adjusted fbr different cell and PACK scheme) | Under half elec trie state, use AC method to measure internal resistance Ikllz | ||
9 | consistency | The monomer pressure difference at the end of charge and discharge is less than 250mV | What is recorded is the highest/low 3.65V/2.5V instantaneous pressure difference in a single charging section | ||
10 | Maximum charge and discharge duration current | I00A | |||
11 | The charging current limiting | 10A | |||
12 | forking temperature range | Charge: 0-55'C | |||
Discharge: -20-^0'C |
Notices:
1. For outdoors, only to generate power. The efficiency of a solar panel is variable depending on
environmental conditions.
2. Avoid any shelter (such as buildings, plants, etc.) during use, otherwise, the charging speed will be
negatively affected.
3. After the device is successfully connected, it is recommended to move your electronic device into a
cool and ventilated place. If the electronic device is in a high-temperature environment for a long time,
power consumption will increase and may occur power failure.
Applications:
Q1. Can I have a sample order?
A. Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A. Sample needs 5-10 days, mass production time needs 3-5 weeks, it depends on order quantity.
Q3. Do you have any MOQ limit?
A. Yes, we have MOQ for mass production, it depends on the different part numbers. 1~10pcs sample
order is available. Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A. We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea
shipping is also optional.
Q5. How to proceed with an order?
A. Firstly let us know your requirements or application. Secondly, We quote according to your require-
ments or our suggestions.Thirdly customer confirms the samples and places a deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A. Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Contact us for more details about Price, Packing, Shipping and Discount.