12.8V Lead Acid Replacement Lithium Ion Battery Solar Battery Storage

Quick Detail:

• LiFeP04 battery, more stable and safe .

• Intelligent BMS equipped inside to maintain the battery always work at best condition .

• Max charge and discharge current as 200A which is specially designed for solar energy .

• Build-in 1.2A equalizer can balance solar cell voltage difference as small as 0.05V in a very short time.

• Excellent standby self-consumption as low as 4mA.

• Automatically output cut off after 30days no charge and discharge to ensure security

• Can cut off output by manual operation .

Description:

12v200ah lithium battery rechargeable solar storage lifepo4 battery pack for car/marine/RV/home

Our LiFePO4 battery provides 5000+ cycles compared to 300~500 cycles in lead acid battery.

The service life of LiFePO4 batteries is 8 to 10 times than the standard lead-acid batteries.

The weight of the lithium iron phosphate battery is 30% lighter than the lead-acid battery

of the same capacity. Without memory effect, no matter what state the battery is, it can be used as soon

as it is charged.deep cycle lithium-ion battery has higher energy density, more stable performance and greater power.

LiFepo4 battery will not burn when overcharged, overdischarged, overcurrent or short circuit, and can withstand high

temperatures without decomposition. It can support fast charging and solar panel charging. Our LiFepo4 batteryis

a green battery, it does not contain any heavy metals and rare metals and is more environmentally friendly.

LiFePO4 Battery has Built-In BMS (Battery Management System) to perform cell balancing and protect battery

from overcharge, over-discharge, overload, overheating, low discharge rate and short circuit. LiFePO4 Battery is

safer than lead acid or agm, avoiding fire and explosion accident.

Specifications:

Notices:

If you have multiple lossigy batteries and want to connect them in series into a 24V, 36V or 48V system,

please carry out the following 2 steps before connecting:

1. Fully charge each battery separately, then stand for 2 hours and check their voltage.

2. Connect all batteries in parallel and continue charging (if there is a large difference in the voltage of

one of the batteries, discharge it at least 80% and then fully charge it again). Do not connect them in series

until their voltages are equal.

If you don't balance them successfully the first time, please repeat it again.

In addition, you don't have to worry about the balance of cells inside the battery, because BMS will help

you solve it.

Applications: