12V 50Ah LiFePO4 Lithium Battery 3000+ Cycles Built-in BMS Travel Trailer

12V 50Ah Rechargeable Battery Module 3000+ Cycles Built-in BMS Travel Trailer

Quick Detail:

Protection:
1. Over Charge Protection
2. Over Discharge Protection
3. Over Current Protection
4. Short Protection

Description:

* Automotive Grade LiFePO4 Battery is manufactured by higher energy density lithium iron phosphate material.

Our 12V 20Ah LiFePO4 battery has 5000-8000 cycles and 10 years lifetime. Stable and excellent performance

makes it very suitable for solar homes, RVs, campers, fishing, boats, golf carts, power tools, electric scooters

and off-grid applications.

* 12V LiFePO4 battery has built-in advanced BMS system, which prevents the battery from malfunctioning

caused by overcharge, overdischarge, overcurrent, short circuit and high temperature, and extends 12V battery

life. At the same time, our 12.8V 20Ah battery also achieves the industry-leading IP67 waterproof, so you don't

need to worry about installing it indoors or outdoors.

* 12V 20Ah deep cycle LiFePO4 battery’s flat discharge curve holds above 12.8V, and 100% of the battery

capacity can be used. Without memory effec, so that no matter what state the battery is, it can be used as

soon as it is charged.

*This 20Ah LiFePO4 battery is expandable to 4 in series and infinite parallel for higher voltage (Maximum 48V)

and larger capacity. XZNY lithium batteries are widely used in most fields, such as: fish finders, trolling motors,

houseboats, children's electric vehicles, electric bicycles, electric robots, UPS backup power, lighting, portable TVs.

Specifications:

Notices:

If you have multiple lossigy batteries and want to connect them in series into a 24V, 36V or 48V system,

please carry out the following 2 steps before connecting:

1. Fully charge each battery separately, then stand for 2 hours and check their voltage.

2. Connect all batteries in parallel and continue charging (if there is a large difference in the voltage of

one of the batteries, discharge it at least 80% and then fully charge it again). Do not connect them in series

until their voltages are equal.

If you don't balance them successfully the first time, please repeat it again.

In addition, you don't have to worry about the balance of cells inside the battery, because BMS will help

you solve it.

Applications: