4mm Wide Nickel Tabs for use as the Negative Terminal of Polymer Li-ion Batteries 50pcs/Box
Specification
Material | Nickel 99.99% Adhesive Polymer Tape on the tab allows for immediate hot sealing (horizontal polymer strip is made of modified polypropylene (PP) and polyethylene naphthalate (PEN)) |
Length | 61mm |
Width | 4mm |
Thickness | 0.09mm in Aluminum Tab |
0.28mm in Nickel Tab with Adhesive Polymer Tape (9.0 mm L * 5.2 mm W) | |
Max. Loading Current | 3A |
Net Weight | 160mg/pcs |
Gross Wight | 18g (Tabs with Box) |
Application | 1. Connect to cathode current collector as polymer battery positive terminal 2. Suggested Sealing Method: (parameter below may vary from case to case) - Soft type heat-sealing blade (Blade with rubber, see MR-SFZ200) - 180-200C for upper blade - 160-180C for lower blade - 40PSI (0.3Mpa) - 3 seconds heating time Adhesive Polymer Tape on the tab allows for immediate hot sealing |