Lithium Battery Heat Sealing Machine For Pouch Cell Top & Side Sealing With 200 mm-400 mm Length

Model: MR-SFZ200

1. MR-SFZ200 Battery Heat Sealing Machine is a compact heating sealer for sealing aluminum-laminated films during pouch cell (polymer Li-Ion cell) case preparation.

2. The battery heat sealing machine adopts soft sealing bar, The sealing is copper in bottom and aluminum and Silicone rubber piece on top. So it can be used for both top and side sealing for pouch cell.

3. It can prepare the pouch cell for the injection of electrolyte by sealing the side and top of the pouch cell with tab.

Features:

1. Unique safety protection and anti-scalding design, the temperature of the upper and lower irons can be adjusted through the button on the thermostat panel.

2. The head is made of copper material, which has good heat transfer effect, saves electricity consumption, improves work efficiency, and saves energy compared with similar products.

3. The pressure of the upper and lower heads can be adjusted by the pressure regulating valve to meet the requirements of different process parameters.

4. The upper and lower heads are driven by cylinders and guided by two linear guide sleeves, which can move up and down flexibly and accurately to ensure the parallelism requirements of the product after edge sealing.

5. It can be applied to the product batteries of different specifications, and the adjustment is simple and convenient, without adjustment and replacement of the seal head.

6. The frame is made of aluminum profile, which has a beautiful appearance; the sheet metal adopts three-dimensional geometric design, which is simple and beautiful.

7. Small size, smooth and even seal marks, beautiful appearance of the edge seal; soft package heat sealing machine equipment.

Specification

Picture for Reference

MRBEST Factory Show