Li-SOCl2 High Temperature Battery For Diesel Cylinder Inspection Devices
International Standard | 1/2AA | Nominal Capacity(mAh) | 700 |
Max Size(mm) | Φ14.5×25.0 | Standard Discharge Current(mA) | / |
Weight(g) | 10 | Max Continuous Current(mA) | 10 |
Nominal Voltage(V) | 3.6 | Max Pulse Current(mA) | 50 |
1. Battery Characteristic
Single cell rated voltage 3.6V, load voltage 3.4~3.6V in high temperature
Flat discharge curve
Normal operating temperature from -20℃ to +50℃, special designed battery able to work at +200℃
Shelf life longer than 10 years at room temperature
2. Main Applications
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
Tire pressure alarm system (TPMS), diesel engine cylinder detection, etc.
Temperature detector
3. FAQS of General Safety Instructions
The battery should be kept as dryly as possible when they are in storage.
The battery should be stopped to using when the abnormal heat release or leakage occurs.
The battery should be kept out of the children firstly. If swallowed by children, please contact a physician at once.
The batteries can’t be short circuit. If positive and negative polarity of a battery is directly connected, this may cause a short circuit and this may lead to toxic materials or gas leakage and/or violent rupture.
When changing batteries be aware that batteries of different electrochemical system, grades, or brands should be not mixed. If different batteries are used or in case of using old and new batteries together this can discharge batteries due to different voltage or capacity. This can cause toxic material or gas leakage and/or violent rupture.
The batteries are not able to put or thrown into the water because it would cause explosion.
During the batteries disposal, you need to follow the local and state regulations.