High Energy Density With Wide Working Temperature 1200mAh A Size 3.6v Primary Lithium Cell For Medical Electronics

ELECTRICAL CHARACTERISTICS

Open circuit voltage (at 23±2°C) 3.65V

Nominal capacity 1200mAh

(At+25°C, battery discharged at continuous current 0.65mA until voltage reaches cut-off voltage 2.0V. The capacity can vary at different temperature, discharge current or cut-off voltage. )

Maximum continuous current 40mA

(At+25°C, 2.0V cut-off, battery discharged for minimum 50% of nominal capacity. )

Maximum pulse discharge current 80mA

(At+25°C, 2.0V cut-off, battery discharged for minimum 50% of nominal capacity with max pulse for 3 seconds after 27 seconds break. The discharged capacity may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Consult HCB.)

Storage (recommended) ≤30°C & ≤75%RH

(For more severe conditions, consult HCB)

Operating temperature range -60°C ~ +85°C
(Operation above ambient temperature may lead to reduced capacity and lower voltage readings at the beginning of pulses. Consult HCB)

APPLICATIONS

Utility Metering, Automatic Meter Reading, Medical Electronics, Memory Backup, Tracking Systems, Law Enforcement (RFID), Earthquake Detectors, Digital Control Devices, Remote Monitory Systems, Electronic Toll Tags, Scientific Instruments, Portable Communication Equipment, Military Radio Stations, and other electric powered devices requiring small size, high power batteries.

WARNING:

● Do Not Short Circuit ● Do Not Recharge ● Do Not Puncture ● Do Not Crush
● Do Not Dismantle ● Do Not Incinerate ● Do Not Mix New and Used Batteries ● Do Not Heat Above 100°C

High Energy Density With Wide Working Temperature 1200mAh A Size 3.6v Primary Lithium Cell For Medical Electronics