5500mAh Non rechargeable Soft Battery CP783970 for GPS tracking
HCB Battery Co., Ltd. was founded in 2001. As a leading primary lithium battery manufacturer and solution provider in China, HCB remains dedicated to leading the R&D and manufacturing of various types of primary lithium batteries.
With every improvement that is made, HCB continues to pursue perfection. Technological development & innovation are of great importance to HCB. We have been focusing on providing reliable products & services to the customers worldwides for more than 24 years.
Nominal Capacity | 5500mAh |
At +25°C,battery discharged at continuous current 10mA until voltage reaches cut-off voltage 2.0V. The capacity can vary at different temperature, discharge current or cut-off voltage. | |
Maximum Continuous Current | 2000mA |
At +25°C, 2.0V cut-off, battery discharged for minimum 50% of rated capacity. | |
Maximum Pulse Discharge Current | 3000mA |
At +25°C, 2.0V cut-off, battery discharged for minimum 50% of rated capacity with max pulse for 3 seconds after 27 seconds break. The discharged capacity may vary according to the pulse characteristics, the temperature, and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions. Please consult HCB. | |
Storage Situation | Temperature ≤ 30℃ Humidity ≤ 75%RH |
Operating Temperature Range | -40℃ to +70℃ |
Battery Dimension | |
Max Weight | 63.0g |
Max Height | 71mm |
Max Thickness | 8mm |
1. Prominent Characteristic
Specific energy density up to 830Wh/L
The minimum operating temperature of the battery can reach -40℃
We can customize the battery size according to customers' design requirements.
Custom batteries and battery packs are also available.
2. CP783970 Applications
Cardiac pacemaker, respirator, oxygenator, inspection devices, monitoring devices, infusion pump, etc.
RFID products, road toll transponder, IC cards, etc.
3. Competitive Advantages
HCB has advanced technology and high degree of automation;
4. General Safety Instructions
Don't charge the battery once.This could lead to gas leakage and could lead to severe rupture or fire.
Batteries should be handled in accordance with local and national regulations.
Do not weld the battery directly.
Do not use deformed or modified batteries.
Don't burn the battery.